Replacing The Oven Lamp; Disassembly Of The Oven Door - Pelgrim IF960MAT Manual

MAINTENANCE

Replacing the oven lamp

Disassembly of the oven door

EN 30
The lamp in this household appliance is only suitable for
illumination of this appliance. The lamp is not suitable for
household room illumination.
• The lamp is consumable material and is not covered by the
guarantee. To replace it you need an oven lamp with the following
specification: fitting E14, 230V / 25W / 300 °C.
• Unscrew the glass cover anticlockwise and replace the oven lamp.
Screw the glass cover back on tightly.
In normal use, the oven door will not need to be removed. However,
should you want to do this, please follow the instructions below.
Warning! The oven door is very heavy and should be well supported.
1. Open the door and tilt lock A in both hinges fully to the outside.
2. Close the oven door halfway, so that the tension is off of the
springs (the oven door will be at an angle of approximately 30°).
3. Hold the door securely at both sides, move along with the closing
movement of the door, while simultaneously lifting the door.
4. Turn the lower part of the door with the hinges B towards you. The
door has now been removed.
5. Clean the door. The door may optionally be tilted so as to clean the
space between the glass with a soft bottlebrush.