Replacing The Oven Lamp - Pelgrim NF942RVSA Manual

MAINTENANCE
EN 16
Removing the oven door
To clean the inside of the oven it is better to remove the oven door.
• Open the oven door and place a rivet (R) in the hole (F) of the hinge.
• Partially close the oven door.
• Lift the door upwards to release the stop pin and the hinge sector.
• Remove the oven door as soon as it is released from the hinge.
• To replace the door follow the instructions in reverse order. Pay
attention to the correct position of the hinge parts!
Removing the glass panel
The inner panel can be removed for easy cleaning of the glass panel.
• Remove the oven door.
• Slide the glass panel and frame upwards out of the oven door.
Note! The glass panel can also be removed when the door is fitted to
the oven. In this event, do ensure that the hinge springs don't cause the
door to slam unexpectedly.
Replacing oven lamp
The oven lamp fitting is live. There is a danger of electric shock!
Before replacing the oven lamp, switch the appliance off by
removing the plug from the socket or switching off the fuse in the
fuse box.
Left oven (large)
• Remove the runners.
• Remove the glass cover (V) of the fitting by placing a screwdriver
between the cover and the oven wall.
• Replace the lamp (L).
Fit a new lamp with the following specifications: 15W/230V ~ 50Hz -
300°C (E14).
• Replace the glass cover.