Advertisement
2.2.2 EJECT (in PLAY/FF/REW/PAUSE mode)
(a) Rotate the CM2 SUB MOTOR in CCW direction to drive the &OP PLATE Ass'y via 567B/C/D GEAR.
(b) At the position shown in figure, the *EJECT LEVER Ass'y is locked so that it moves together with the OP PLATE Ass'y.
(c) The \CASSETTE CASE is moved up along a slot of
EJECT LEVER in reverse motion of EJECT
(d) The |PS ACTUATOR PLATE is pushed by the EJECT
LEVER Ass'y, then it rotates to push out the PACK
SLIDER.
(e) Thus, a cassette tape is pushed out by the 'PACK
SLIDER.
2.2.3 Direction Change
(a) Which direction FWD or REW should be changed to is
determined by the microprocessor that has saved current
mode according to the MODE SW position, then the CM2
SUB MOTOR is rotated CW (REW
(FWD REV).
&
OP PLATE is moved via 567B/C/D GEAR.
(b) The
(c) Two modes FWD and REV are attained by the OP PLATE
that reciprocates as shown in figure, and accordingly, the
(SB PLATE moves like a seesaw along this slot to recip-
rocate the 4MAIN PLATE.
(d) Hence, FWD (or REV) motion is executed by the operation
after step m) in 2.2.1(l).
MECHANISM DESCRIPTION
PLAY.
FWD) or CCW
D40-1132-05
17
Advertisement
