Advertisement
D40-1132-05
1.15. HD1 P HEAD/$HEAD SP PLATE
Disassembling
C
(a) Remove two
ADJUST SCREWS.
(b) Thus, HD1 P HEAD and
removed.
Reassembling
(a) Insert ADJUST SCREWS into p HEAD/HEAD SP PLATE
in this order.
(b) Insert a flexible cable into a hole A of
Ass'y as shown in figure.
(c) Under this condition, insert ADJUST SCREWS as
shown, then tighten the screws.
1.16. 4MAIN PLATE
Reassembling
(a) Following the disassembling flowchart, if there are parts
4
to be removed, shift
so that they can be removed.
Disassembling
(a) Insert portions A and B into
mount the Main Plate on the CHASSIS, avoiding sticking
at both ends, as shown in figure.
(b) Under this condition, slide the Main Plate while pushing
the portion C (so that it slides under the CHASSIS).
(c) Confirm that the Main Plate moves smoothly.
DISASSEMBLY FOR REPAIR
$
HEAD SP PLATE will be
@
HEAD PANEL
MAIN PLATE in arrow direction,
1
CHASSIS Ass'y and
12
Advertisement
