Kenwood DDX771WBT Instruction Manual

Monitor with dvd receiver

Advertisement

Quick Links

DDX771WBT
MONITOR WITH DVD RECEIVER

INSTRUCTION MANUAL

© 2014 JVC KENWOOD Corporation
LVT2514-001A (RN)

Advertisement

Table of Contents
loading

Summary of Contents for Kenwood DDX771WBT

  • Page 1: Instruction Manual

    DDX771WBT MONITOR WITH DVD RECEIVER INSTRUCTION MANUAL © 2014 JVC KENWOOD Corporation LVT2514-001A (RN)
  • Page 2: Table Of Contents

    CONTENTS BEFORE USE V WARNINGS: (To prevent accidents and BEFORE USE............2 BLUETOOTH ............24 damage) How to reset your unit............ 3 SETTINGS .............. 32 • DO NOT install any unit or wire any cable in a INITIAL SETTINGS ..........4 Settings for using applications of the iPod/ location where;...
  • Page 3: How To Reset Your Unit

    BEFORE USE ❏ How to reset your unit The marking of products using lasers V Cautions on the monitor: • The monitor built into this unit has been produced with high precision, but it may have some ineffective dots. This is inevitable and is not considered defective.
  • Page 4: Initial Settings

    INITIAL SETTINGS Finish the procedure. Display the <Security Code Set> screen. Initial s etup • Press [K] repeatedly to change the page on When you power on the unit for the first time or the <System> menu screen. reset the unit, the initial setting screen appears. •...
  • Page 5 INITIAL SETTINGS ❏ Activating the security function Set the clock time. Clock settings You can activate the security function to protect Display the <TOP MENU> screen. your receiver system against theft. On the source control screen: Display the <System> setting screen. On the <TOP MENU>...
  • Page 6: Basics

    BASICS p S/T button / V.OFF button Component names and functions • Displays the phone book. (Press) (Page 28) Functions same as [S]/[T] on the touch • The function of the button when held varies panel during playing a source. q APPS button depending on the <Phonebook Key Long Press>...
  • Page 7: Common Operations

    BASICS To at tenuate t he s ound Select an angle (0 – 6). Common operations ❏ Turning on the power The ATT indicator lights up. To cancel the attenuation: Press the same button ❏ Turning off the power again. •...
  • Page 8: Common Screen Operations

    BASICS ❏ Turning off the screen Common operation buttons: <TOP MENU> screen 1 Displays other operation buttons. Displays the source control screen and settings • Disabled when there are no other buttons. screen. 2 Switches between the normal source control screen and easy control screen.
  • Page 9: Selecting The Playback Source

    BASICS ❏ Touch screen operations ❏ To display all sources and items on the Selecting the playback source <TOP MENU> screen On the <TOP MENU> screen: 1 Displays the video control menu while playing a video. • You can change the items (other than [SETUP]) to display on the <TOP MENU>...
  • Page 10: Discs

    DISCS ❏ Ejecting a disc ❏ Indications and buttons on the source Playing a disc control screen • If a disc does not have a disc menu, all tracks on For DVD/DVD-VR/VCD/DivX/MPEG1/MPEG2 it will be played repeatedly until you change the source or eject the disc.
  • Page 11 DISCS Operation buttons Does not appear for DVD/DVD-VR/VCD. Operation buttons Search speed varies depending on the type of disc or file. Displays the easy control screen. Displays the easy control screen. Does not appear for DVD/DVD-VR. (Page 8) (Page 8) Appears only for DVD-VR. Displays the folder/track list.
  • Page 12 DISCS ❏ Selecting a folder/track on the list ❏ Video menu operations [ZOOM]* Displays the picture size selecting screen. (Page 36) You can display the video menu screen during video [Aspect] Selects the aspect ratio. playback. (Page 36) • Available items on the screen differ depending on the types of the loaded disc and playback files.
  • Page 13 DISCS ❏ Selecting playback mode For VCD • To select a track directly, press [Direct] to display the direct selecting buttons, then... Selects Repeat playback mode. Selects Random playback mode. • For DVD/DVD-VR: Repeat play is available. For VCD (without PBC)/CD/DivX/MPEG1/MPEG2/ MP3/WMA/AAC: Repeat and Random play are available.
  • Page 14 DISCS Enter the 4-digit parental pass code (1), <Screen Select the monitor type to watch a Settings for disc playback Ratio>* wide screen picture on the external and press [Enter] (2). monitor. 16:9 (Initial) 4:3 LB 4:3 PS • The items available on the <DISC Mode> screen are different depending on the discs/files played back.
  • Page 15: Usb

    [O] [N] Reverse/forward search.* ❏ Indications and buttons on the source Connecting a USB device Starts/pauses playback. [IW] control screen You can connect a USB mass storage class device Displays other operation buttons. such as a USB memory, Digital Audio Player etc. to •...
  • Page 16: Ipod/Iphone

    iPod/iPhone ❏ Setting <Picture Display Time> • On the <Category List>/<Folder List>: You Preparation can switch the file type to list: Press [ ] to list Set the interval between slides during slide-shows of ❏ Connecting iPod/iPhone audio files, [ ] to list video files, or [ ] to the picture files.
  • Page 17 iPod/iPhone Bluetooth connection • If [Enter] for <iPod Setup> cannot be • When selecting <USB + AV-IN> or <USB 1 Pair the iPod/iPhone through Bluetooth. (Page 24) selected, put the unit in standby. (Page 7) Wire>, go to step 5. • For iPhone 5/iPod touch (5th Generation)/iPod When selecting <HDMI + Bluetooth>...
  • Page 18 iPod/iPhone ❏ Selecting preference settings for iPod/ Operation buttons Playback operations Displays the easy control screen. iPhone playback (Page 8) When the source is “iPod”... When the operation buttons are Displays the audio/video file list. not displayed on the screen, touch (Page 19) the area shown on the illustration.
  • Page 19: Apps

    APPs iPod/iPhone ❏ Selecting an audio/video file from the You can use an App of the connected iPod touch/ Selects an audio/video file. [S] [T] iPhone/Android on this unit. menu Reverse/forward search. [O] [N] Preparation Starts/pauses playback. [IW] [MENU] Displays the <TOP MENU> screen. Connect the iPod touch/iPhone/Android.
  • Page 20: Tuner

    TUNER [PTY]* Enters PTY search mode. (Page 21) ❏ Changing the display information Listening to the radio [AM] Selects the AM band. ❏ Indications and buttons on the source [FM] Selects the FM band. control screen [SEEK] Changes the seek mode. •...
  • Page 21 TUNER ❏ Activating/deactivating TI Standby Manual p resetting FM RBDS features Tune in to a station you want to preset. Reception ❏ Searching for FM RBDS programs—PTY (Page 20) Search Select a preset number. You can search for your favorite programs being broadcast by selecting the PTY code.
  • Page 22: Other External Components

    OTHER EXTERNAL COMPONENTS ❏ Starting playback Using external audio/video Using a rear view camera Connect an external component to the players—AV-IN • To connect a rear view camera, see page  52. AV-IN1 and iPod/AV-IN2 input terminals. • To use a rear view camera, a REVERSE lead When the operation buttons are (Page 52 ) connection is required.
  • Page 23: Using A Smartphone-Hdmi/Mhl

    OTHER EXTERNAL COMPONENTS ❏ Displaying the picture from the rear Select “HDMI/MHL” as the source. Using a smartphone—HDMI/MHL On the <TOP MENU> screen: view camera ❏ What is HDMI/MHL? The rear view screen is displayed when you shift the HDMI stands for High Definition Multi-media gear to the reverse (R) position.
  • Page 24: Bluetooth

    BLUETOOTH Auto pairing Information for using Bluetooth® Connecting Bluetooth devices When <Auto Pairing> is set to [ON], iPhone is devices ❏ Registering a new Bluetooth device automatically paired when connected via USB. (Page 31) When you connect a Bluetooth device to the unit for the first time, pair the unit and the device.
  • Page 25 BLUETOOTH Pairing a Bluetooth device from the target device Change the PIN code. Select the unit (“DDX****”) on your using a PIN code (for Bluetooth 2.0) • If you wish to skip changing the PIN code, go Bluetooth device. to step 3. Display the <Bluetooth Setup>...
  • Page 26 BLUETOOTH ❏ Deleting a registered Bluetooth device Pairing a Bluetooth device from this unit using a PIN code (for Bluetooth 2.0) Display the <Bluetooth Setup> screen. Display the <Bluetooth Setup> screen. (Page 25) (Page 25) Select the device you want to connect (1), then press [Connection] (2).
  • Page 27 BLUETOOTH ❏ Adjusting the volume of calls/earpiece/ ❏ Reducing noise/adjusting the echo Using the Bluetooth mobile phone microphone cancel level ❏ Receiving a call While talking... While talking... When a call comes in... • Call information is displayed if acquired. •...
  • Page 28 BLUETOOTH ❏ Sending text during a call ❏ Making a call From the preset list/phone book/call lists You can send text during a call using the DTMF (Dual Display the phone control screen. Tone Multi Frequency) function. On the <TOP MENU> screen: While talking...
  • Page 29 BLUETOOTH • To use the A to Z search on phone book: • To display the details of an entry: Voice di aling When the phone book list is displayed, you can When the phone book list is displayed, you can •...
  • Page 30 BLUETOOTH ❏ Presetting phone numbers Playback information Using the Bluetooth audio player 1 Playback status* You can preset up to 5 phone numbers. 2 Playing time* Display the phone control screen. • To register a new device, see page 24. 3 Tag data (current track title/artist name/album •...
  • Page 31 BLUETOOTH ❏ Setting items < Auto Pai ring> • ON (initial): Establishes Settings for Bluetooth devices pairing automatically with the <Paired Device Press [Enter] to show the list You can change various settings for using Bluetooth connected iOS device (such as List>...
  • Page 32: Settings

    SETTINGS <USB 1 Wire> Select this when the iPod/ Settings for using applications of iPhone is connected using USB the iPod/iPhone/Android 2.0 cable (accessory of the iPod/ iPhone). Before using applications of the iPod/iPhone/ • If you do not need to change the setting, <HDMI + Select this when the iPod/ Android , select the device to use and connection...
  • Page 33: Sound Adjustment

    SETTINGS ❏ Setting the car type and speakers • You can also display the <Equalizer> screen by Sound ad justment pressing AUDIO on the monitor panel. Display the <Car Setting> screen. ❏ Using the sound equalization Storing your own adjustment—Adjusting the On the <TOP MENU>...
  • Page 34 SETTINGS ❏ Setting the speakers—speaker size and ❏ Setting the listening position Adjust the crossover frequency of the crossover frequency selected speaker. You can adjust the sound effects according to your listening position. Display the <Speaker Select> screen. Display the <Position> screen. On the <TOP MENU>...
  • Page 35: Adjustment For Video Playback

    SETTINGS Adjusting the Digital Time Alignment (DTA) Determining the value for <Position DTA> Adjustment for video playback Make fine adjustment of the delay time of the adjustment ❏ Adjusting the picture speaker output to have a more suitable environment If you specify the distance from the center of the for your vehicle.
  • Page 36 SETTINGS ❏ Zooming the picture Adjust the picture. Select the aspect ratio. You can zoom the picture. Zooming is available only when disc is played back. Display the adjustment menu. <Bright> Adjusts the brightness. (−15 to +15) <FULL>* For 16:9 original pictures <Contrast>...
  • Page 37: Changing Display Design

    SETTINGS ❏ Storing your favorite image for the To select a panel color Changing display design background You can change the background and panel color. You can set your favorite image (JPEG/PNG/BMP file) Display the <User Customize> screen. stored on the connected USB device. On the <TOP MENU>...
  • Page 38: Customizing The Screen

    SETTINGS Customizing the <TOP MENU> Customizing the system settings screen ❏ Memorizing/recalling the settings You can arrange the items to display on the <TOP • You can memorize the settings changed in the MENU> screen. <Setup> menu and recall the memorized settings anytime.
  • Page 39 SETTINGS ❏ Locking the settings ❏ Adjusting the touch position You can lock the settings to prevent them from You can adjust the touch position on the touch being changed. panel if the position touched and the operation • is shown beside the settings that can be performed do not match.
  • Page 40: Setting Menu Items

    SETTINGS Balance: Adjust the left and right speaker output <Car Setting> Setting menu items balance. Select a car type and speaker location. (Page 33) ❏ Displaying the <Setup> menu screen • L6 to R6 (Initial: 0) • Car type: Off (initial)/Compact/Full Size Car/ Press [J]/[K]/[H]/[I] or drag [ ] to adjust.
  • Page 41 SETTINGS ❏ <Display> setting screen ❏ <Input> setting screen <Menu Customize> Change the items to display on the <TOP MENU> <Dimmer> <R-CAM I nterrupt> screen. (Page 38) • Auto (Initial): Dims the screen and button • ON: Displays the picture from the rear view <Screen Adjust>...
  • Page 42 SETTINGS ❏ <System> setting screen <APP Setup> < > s • APP Connection Setup: Con gure the Apps Assigns the function of the AUD button when held. < > • V-OFF Select the text language used for on-screen • APP Interrupt Volume: Adjust the volume of App. •...
  • Page 43: Remote Controller

    REMOTE C ONTROLLER ❏ Remote Controller mode switch ❏ Battery installation Overview The functions operated from the remote controller Use two “AAA”/”R03”-size batteries. This unit can be operated using the Remote differ depending on the position of the mode switch. Insert the batteries with the + and –...
  • Page 44: Remote Controller

    REMOTE CONTROLLER Hands-free communication Play/Pause Operations from the remote When a call comes in, it answers Pauses the track. controller the call. Press again to resume playing. ❏ Common operations (AUD mode) Source switching Stop Function Switches to the source to be Stops and memorizes the point Switches the control screen.
  • Page 45 REMOTE CONTROLLER Numeric keypad Picture Angle Direct search • Specify the number to search Switches the picture angle each Pressing this key switches the for in direct search. time you press this key. features that can be searched for • Press to fast directly.
  • Page 46 REMOTE CONTROLLER ❏ Radio (AUD mode) ❏ iPod (AUD mode) Direct tuning Band switching After pressing this key, use the Music/Video search keypad to specify the broadcast Switches to bands received by Selects the music/video to be station you wish to receive. the unit.
  • Page 47 REMOTE CONTROLLER • The unit can register/change all of the button’s Display the <Steering Remote Control Using the steering remote functions at the same time. To do this, press each Setting> screen. controller button in turn and after pressing all of them, •...
  • Page 48: Connection/Installation

    CONNECTION/INSTALLATION • If your car’s ignition does not have an ACC • This unit has a cooling fan to decrease the Before installing the unit internal temperature. Do not mount the unit position, connect the ignition wires to a power V WARNING source that can be turned on and off with the in a place where the cooling fan of the unit is...
  • Page 49 CONNECTION/INSTALLATION ❏ Supplied accessories for installation ❏ Installation procedure Installing the unit 1 Wiring harness x 1 To prevent a short circuit, remove the key ❏ Installation on Toyota Car using 2 Extension wire x 1 from the ignition and disconnect the ·...
  • Page 50 CONNECTION/INSTALLATION Connection ❏ Connecting Wires to Terminals for Toyota Cars Connect to the vehicle’s steering remote harness. Page 52 • Depending on the type of vehicle, it cannot Page 52 Pages 51 – 52 be connected. USB terminal: Connect to the vehicle’s reverse lamp harness when Purple with white stripe Pages 51 –...
  • Page 51: Connecting A Usb Device

    CONNECTION/INSTALLATION ❏ Connecting a USB device ❏ Connecting an iPod/iPhone USB device* iPod/iPhone except for iPhone 5/iPod touch iPhone 5/iPod touch (5th Generation)/iPod (commercially available) (5th Generation)/iPod nano (7th Generation) nano (7th Generation) (commercially available) (commercially available) Lightning-Digital KCA-iP102 AV adapter (optional accessory) (accessory of the iPod/iPhone)
  • Page 52 CONNECTION/INSTALLATION ❏ Connecting a smartphone ❏ Connecting external components ❏ Connecting microphone for Bluetooth Connect the microphone (7) to the MIC terminal. Android, etc. Android, etc. • To install the microphone, peel off the adhesive (with HDMI) (with MHL) tape, fix it on the installation position, then adjust (commercially available) (commercially available) the direction of the microphone to face the driver.
  • Page 53: References

    REFERENCES ❏ To keep discs clean Maintenance More information Dirty discs may not play correctly. ❏ Caution on cleaning the unit ❏ File playback If a disc does become dirty, wipe it with a soft cloth Playing DivX les (for discs only) Do not use any solvent (for example, thinner, in a straight line from the center to the edge.
  • Page 54 REFERENCES -LC/ ❏ Disc playback • for USB: MP3/WMA/WAV/AAC-LC/FLAC) – • format. Disc type Recording format, – (regardless of the letter case—upper/lower). – DVD Video* • and voice format. – • DTS sound cannot be conditions below: reproduced or emitted from –...
  • Page 55 REFERENCES ❏ About data stored in the connected Unplayable discs • The maximum number of characters (when the • Unplayable disc types and formats are as follows: characters are 1 byte): USB device/iPod/iPhone – DVD-Audio/DVD-ROM discs – Folder names: 128 characters •...
  • Page 56 • When operating an iPod/iPhone, some operations Welsh Greenlandic Rhaeto-Romance may not be performed correctly or as intended. In Bhutani Cambodian Kirundi Ukrainian this case, visit the following KENWOOD web site: Greek Kannada Rumanian Urdu <www.kenwood.com/cs/ce/ipod> • For some iPod/iPhone models, the performance Esperanto Korean (KOR)
  • Page 57: Error Message List

    REFERENCES “Authorization Error”: “Initialize Error”: Error message list • Check whether the connected iPod/iPhone is • The unit has failed to initialize the Bluetooth compatible with this unit. (Page 56) module. Try the operation again. If an error occurs while using the unit, a message appears.
  • Page 58: Troubleshooting

    REFERENCES ❏ Discs ❏ USB Troubleshooting Recordable/Rewritable discs cannot be played “Reading...” does not disappear from the screen. What appears to be trouble is not always serious. back. • Turn the power off and on again. Check the following points before calling a service •...
  • Page 59 REFERENCES ❏ iPod/iPhone ❏ Bluetooth No sound of videos comes out. • Connect with USB Audio and Video cable No sound comes out of the speakers. Phone sound quality is poor. KCA-iP202 for iPod/iPhone except for iPhone • Disconnect the iPod/iPhone, then connect it again. •...
  • Page 60: Specifications

    REFERENCES ❏ DVD player section The unit does not pair with the Bluetooth device. Specifications • For devices compatible with Bluetooth 2.1: D/A Converter 24 bit Register the device using a PIN code. (Page 25) ❏ Monitor section Audio Decoder Linear PCM/Dolby Digital/MP3/ •...
  • Page 61 REFERENCES ❏ USB interface section ❏ Bluetooth section SLOPE –6/–12/–18/–24 dB/Oct. LOW PASS FILTER frequency USB Standard USB 2.0 High Speed Technology Bluetooth 3.0 + EDR 50/60/80/100/120/Through File System FAT 16/32 Frequency 2.402 GHz to 2.480 GHz SLOPE –6/–12/–18/–24 dB/Oct. Maximum Power Supply Current Output Power +4 dBm (MAX), 0 dBm (AVE),...
  • Page 62 REFERENCES ❏ AM tuner s ection ❏ Audio section ❏ Trademarks and licenses • Manufactured under license from Dolby Frequency Range (10 kHz) Maximum Power (Front & Rear) Laboratories. Dolby and the double-D symbol are 530 kHz to 1 700 kHz 50 W ×...
  • Page 63 Bluetooth SIG, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 4 VISUAL PATENT PORTFOLIO LICENSE FOR Inc. and any use of such marks by JVC KENWOOD OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. THE PERSONAL AND NON-COMMERCIAL USE Corporation is under license.

Table of Contents