Prem-I-Air EH1910 Manual page 8

WI-FI SETUP – "SMART LIFE-SMART LIVING" APP INFORMATION
The "Smart Life-Smart Living" app is available for android and iOS. Scan the QR code below to access the app.
This appliance allows you to operate the appliance via your home network. A prerequisite is a permanent Wi-Fi
connection to your router and the free app "Smart Life-Smart Living".
We recommend disconnecting the appliance from the power supply when you are away from home for extended
periods of time if you do not plan on using it to prevent accidental activation through the app.
System Requirements:

iOs 8.0 or higher

Android 4.1 or higher
1. Install the "Smart Life-Smart Living" App and create a user account.
2. Activate the Wi-Fi Function on the appliance
2.1. Ensure your appliance is within range of the router
2.2. Press and hold the TIMER button for about 3 seconds, the Wi-Fi LED will flash rapidly.
3. Launch the app and select "+"
4. Select "Air conditioner" menu and follow the instructions on the app.
5. Once the appliance has been successfully connected, the Wi-Fi LED will be permanently illuminated
6. To disconnect, press and hold the TIMER button for about 3 seconds, the appliance will disconnect and the Wi-Fi
LED will go out.
The timer can be used for 2 operations: Delay start and Delay stop
1. Delay Start
1.1. When the unit is turned off, press the TIMER key to turn on timer function
1.2. Use the ADD and MINUS buttons to set the timer value
1.3. The unit will switch on after the set number of hours
2. Delay Stop
2.1. When the unit is switched on, press the TIMER key to turn on the timer function
2.2. Use the ADD and MINUS buttons to set the timer value
2.3. The unit will switch off after the set number of hours
3. To cancel the timer, use the ADD and MINUS buttons to set the timer value to "00"
CONNECTING VIA THE APP
TIMER SETTING