Subscribe to Our Youtube Channel
Related Manuals for Pulsar ROUPS12VR
Summary of Contents for Pulsar ROUPS12VR
- Page 1 ROUPS12VR v.1.0 ROUPS 12V/5A RACK mounted buffer power supply of the recorder. Edition: 1 from 15.03.2016 Supercedes the edition: ------...
-
Page 2: Table Of Contents
RACK POWER CCTV www.pulsar.pl ROUPS12VR Features: • • LED optical indication: LED: AC, DC, TEMP, LoB, DC 12V/5A uninterruptible power supply of the recorder ALARM, DVR • • the ALARM technical output of collective failure – relay outputs protected by 5A melting fuses •... -
Page 3: Technical Description
1. Technical description. 1.1. General description. The ROUPS12VR buffer power supply unit is designed for uninterrupted power supply of up to recorder requiring stabilized voltage of 12V DC. The PSU provides voltage of U=12V DC current efficiency max. I=5A + 1A battery charge. -
Page 4: Specifications
RACK POWER CCTV www.pulsar.pl ROUPS12VR Fig. 2. The front power of the power supply unit. Fig.3. The view of the PSU . Specifications . 1.4. electrical parameters (tab.2) - mechanical parameters (tab.3) - operation safety (tab.4) - operating parameters (tab.5) Electrical parameters (tab. -
Page 5: Installation
RACK POWER CCTV www.pulsar.pl ROUPS12VR about 20s.) Battery circuit protection SCP and reverse polymer fuse PTC polarity connection Surge protection varistors Excessive discharge protection UVP U<9,5V (+/-5%) – disconnect of connection battery Optical indication of operation: LED: AC, DC, TEMP, LoB, ALARM, DVR... -
Page 6: Installation Procedure
RACK POWER CCTV www.pulsar.pl ROUPS12VR As the PSU is designed for a continuous operation and is not equipped with a power-switch, therefore an appropriate overload protection shall be guaranteed in the power supply circuit. Moreover, the user shall be informed about the method of unplugging (usually through assigning an appropriate fuse in the fuse-box). The electrical system shall follow valid standards and regulations. -
Page 7: Technical Output
RACK POWER CCTV www.pulsar.pl ROUPS12VR 3.2. Technical output. The power supply is fitted with the ALARM output of collective failure (relay type). A collective failure can be triggered by the following events: - 230V AC mains power failure - Melting fuse activation F - Failure of the switch mode power supply -Too high temperature of the switch mode power supply (>70°C) - Page 8 GENERAL WARRANTY CONDITIONS 1. Pulsar (manufacturer) grants a two-year quality warranty for the equipment, starting from the production date. 2. The warranty includes free-of-charge repair or replacement with an appropriate equivalent (selected by the manufacturer) if the malfunction is due to the manufacturer.
Need help?
Do you have a question about the ROUPS12VR and is the answer not in the manual?
Questions and answers