Gigabit Ethernet Switch User's Guide
Configure Port-based VLANs
Choose Configure Port-based VLANs on the VLAN Configuration screen (System Configuration !
Configure VLANs & MAC-based Broadcast Domains) to access the Port-based VLAN Configuration
menu pictured below (note that if you have just changed to this mode, you must also reboot the Switch before
being able to work with port-based VLANs):
Figure 6-32. Configure VLAN (Port-Based) menu
The field you can set is:
Management Vid Enter a VLAN name for use with in-band management.
Select Add a Port-Based VLAN from the menu above to access the following screen:
Figure 6-33. Create a Port-based VLAN screen
To create a port-based VLAN, fill in the VLAN Name field in the screen above. Next toggle Yes or No for each
port member. Press APPLY to let the changes take effect.
50