Table of Contents
Advertisement
Gigabit Ethernet Switch User's Guide
The information displayed above includes:
Ports This field always displays either "1 to 4" or "5 to 8" in this 8-port switch version.
Polling Interval Select the desired update increment setting from: 1 sec, 5 sec, 15 sec, 30 sec, 1 min, or
Suspend.
CRC Errors The number of frames that fail the CRC integrity check.
Oversize Frames The number of good frames with length greater than 1518 bytes and therefore are
greater than the maximum legal length.
Fragments The number of packets less than 64 bytes with either bad framing or an invalid CRC.
These are normally the result of collisions.
Jabbers The number of frames with length more than 1518 bytes and with CRC error or misalignment
(bad framing).
Late Collision The number of collisions that occur at or after the 64
Mac Rx Errors The number of frames with received MAC Errors.
Dropped Frames Counts received packets which are dropped due to any of the following reasons: lack
of available receive buffers, port-disable, link-test-fail, spanning tree, or empty distribution list.
Total errors The sum of the CRC Errors, Oversize Frames, Fragments, Jabbers, Late Collision, Mac
Rx Errors, and Dropped Frames counters.
Collisions The number of collision errors.
Press CLEAR COUNTER to reset all statistic counters on this screen.
Port Packet Analysis Statistics
To access the fourth item on the Traffic Statistics menu, choose Port Packet Analysis Statistics. The
following table appears:
Figure 6-54. Port Error Packet Statistics screen
byte (octet) in the frame.
th
64
Advertisement
Table of Contents
