Table of Contents
Advertisement
Gigabit Ethernet Switch User's Guide
Save Settings to TFTP Server
You can command the Switch to transmit a copy of its current configuration settings to any TFTP server on
the network. This is done by choosing Save Settings to TFTP Server from the Utilities menu. You will
first be asked if you want to save the current configuration (including any recent, possibly unsaved changes)
to the Switch's non-volatile memory; then the following screen will appear:
Figure 6-47. Save Settings to TFTP Server screen
To upload the current configuration settings from the Switch to a TFTP server, enter the server's IP address
and a suitable file name, then choose START. The result will be reported in the lower part of the screen.
Save Switch History to TFTP Server
The Save Switch History to TFTP Server function lets you command the Switch to send a record of
operational events (see Switch History under Network Monitoring, further on in this chapter) to any
TFTP server on the network. Choose this function to display the following screen:
Figure 6-48. Save Switch History to TFTP Server screen
To upload Switch history to a TFTP server, enter the server's IP address and a suitable file name, then choose
START. The result will be reported in the lower part of the screen.
59
Advertisement
Table of Contents
