Advertisement
How to Operate
❖ Set the fan on a level and dry surface.
❖ Plug the power cord into the socket. Making sure the speed control is at OFF
position.
❖ Using the Remote Control – Open the cover at the bottom of the remote control and
insert the batteries (Not Included)
OFF: To switch off the fan.
ON/SPEED: To switch on the fan and set the speed.
TIMER: The fan has an automatic timer to turn the unit OFF of up to 7 hours.
❖ You may also access the controls above using the touch buttons located on the units
control panel.
❖ Adjust the fan to your desired angle by moving the head up or down.
❖ After turning the Fan off, unplug the unit from the electrical outlet.
OPERATING COSTS
At time of going to press, the average cost of electricity is £0.12 per unit (kilowatt-hour).
The amount you are being charged will be shown on your electricity bill. At this cost, the
appliance will cost 8p per day to run on the "low speed" setting, 10p per day on the "medium
speed" setting or 12p per day to run on the "high speed" setting.
PAT TESTING
When used in an office environment, this product must be safety-tested yearly by a qualified
electrician (PAT Tested) in order to comply with the Electricity at Work.
recommend that it is PAT tested regularly when used in a domestic environment.
GENERAL SAFETY REQUIREMENTS
Domestic wiring must be tested periodically by a qualified electrician at least once every 10
years or at every change of occupancy. For office and retail premises, and buildings such as
village halls, the wiring must be inspected at least once every 5 years. It is recommended that
all building be fitted with smoke alarms (it is mandatory for new buildings).
4 |
P a g e
Regulations We
Advertisement
