Download Print this page

Pat Testing - Prem-I-Air EH1622 User Manual

16" (40cm) remote control wall fan

Advertisement

Timer : repeatedly pressing the timer button will cycle through the 0.5,1,2,& 4
hour settings allowing a time selection of between 0.5 & 7.5 hours. At the
end of the selected time the fan will stop. For continuous operation do not
touch this button.
Mode : The fan has 3 pre-set modes,
It is normal for the motor to become warm in normal use.
Unplug the appliance from the mains when not in use.
At time of going to press, the average cost of electricity is £0.12 per unit (kilowatt-
hour). The amount you are being charged will be shown on your electricity bill. At
this cost, the EH1522 will cost 20p per day to run on the "low speed" setting, or
33p per day to run on the "high speed" setting.
When used in an office environment, we recommend that this product should be
safety-tested yearly by a qualified electrician (PAT Tested).
We recommend that it is PAT tested regularly when used in a domestic
environment.
o
NORmal for everyday use, and will operate as per the
set fan speed.
o
NATural: operates to the following pattern depending
upon the fan setting:
o
High Speed
H
M
L
Med Speed
H
M
L
Low Speed
H
M
L
o
SLEep: In this operating mode the fan will operate at
the set speed for half an hour then drop to the next
lowest setting for another half an hour then operate at
its lowest speed setting till the fan turns off.
OPERATING COSTS

PAT TESTING

4
Secs

Advertisement

loading