Advertisement
Description of parts
1. Front Grill
2. Blade
3. Speed Selector Knob
4. Carry Handle
5. Tilt Axis
6. Rear Grille
7. Pole
8. Base
9. Pole connector
10. Remote control unit
Assembly
1.
Carefully remove the fan from the carton. Place the base flat on the floor.
2.
Stand Fan Option - Line up the notch on the base connector (9) and insert into the base
(8) to snap it in place. Twist the pole (7) until secured.
3.
Floor Fan Option - Line up the notch on the base connector (9) and insert into the base
(8) to snap it in place.
4.
Place the head assembly onto the end of the pole and continue turning unit it is
secured on the pole.
3 |
P a g e
Advertisement
