Related Manuals for Prem-I-Air EH1826
Summary of Contents for Prem-I-Air EH1826
- Page 1 EH1826 PremIAir 16” (40 cm) Oscillating and Height Adjustable 3 Speed Pedestal Fan with Remote Control and Timer User Manual Please Retain for Future Reference...
-
Page 2: Before Use
IMPORTANT Installer and Users please note: These instructions should be read carefully and left with the user of the product for future reference. BEFORE USE You must inspect the appliance including its cable and plug for any signs of damage. If the product is damaged, DO NOT use it, and contact your supplier immediately. -
Page 3: Operation
ASSEMBLY (CONTINUED) • Slide the motor assembly onto the telescopic shaft, and tighten the thumb screw. • Loosen the shaft clamp screw, pull the telescopic shaft to the required height, and re-tighten the clamp screw. • Rotate the guard retaining nut anticlockwise to remove it from the motor housing. -
Page 4: General Safety Requirements
At time of going to press, the average cost of electricity is £0.15 per unit (kilowatt-hour). The amount you are being charged will be shown on your electricity bill. At this cost, the EH1826 will cost 14p per day to run on the highest speed setting. -
Page 5: Technical Specification
Air Flow: ..............3222 m3/h (max) SERVICE WARRANTY Prem-i-Air guarantees the product free from defects in materials and workmanship for a period of 2 years. Should this appliance be operated under conditions other than those recommended, at voltages other than the voltage indicated on the appliance, or any attempts made to service or modify the appliance, then the warranty will be rendered void.