Operation; Pat Testing; General Safety Requirements - Prem-I-Air EH0137 User Manual

These instructions should be read carefully and left with the user of the product
for future reference.

Plug the mains lead into a 13 Amp mains socket. If any other appliances are
connected to the same extension lead, make sure that it is rated for the total
power of all appliances connected.

If connecting via an extension lead, make sure that the lead is rated at 3
Amps or more, and that it is fully unwound.

Switch the appliance on at the mains socket.

Use the rotary switch to the speed required:
o
o
o
o

It is normal for the motor to become warm in normal use.

Unplug the appliance from the mains when not in use.
At time of going to press, the average cost of electricity is £0.12 per unit (kilowatt-
hour). The amount you are being charged will be shown on your electricity bill. At
this cost, the EH0137 will cost 77p per day to run on the "low speed" setting, or
95p per day to run on the "high speed" setting.
When used in an office environment, we recommend that this product should be
safety-tested yearly by a qualified electrician (PAT Tested).
We recommend that it is PAT tested regularly when used in a domestic
environment.

GENERAL SAFETY REQUIREMENTS

Domestic wiring must be tested periodically by a qualified electrician at least
once every 10 years or at every change of occupancy.
For office and retail premises, and buildings such as village halls, the wiring must
be inspected at least once every 5 years.
It is recommended that all building be fitted with smoke alarms (it is mandatory
for new buildings).
IMPORTANT
Installer and Users please note:

OPERATION

O = OFF
1 = low speed
2 = medium speed
3 = high speed
OPERATING COSTS

PAT TESTING

2