12"/16" power stand fan with remote control (6 pages)
Summary of Contents for Prem-I-Air EH1622
Page 1
EH1622 16" (40cm) Remote Control Wall Fan 3 speed, Adjustable User Manual...
Page 2
IMPORTANT Installer and Users please note: These instructions should be read carefully and left with the user of the product for future reference. Assembly To assemble the fan; Remove the grille lock nut(4) from the motor shaft(6) Fit the rear grille by positioning the locating pins in the horizontal slots on the grill.
Installation Before installation select a suitable location for the fan where it is unlikely to cause an obstruction. Draw a vertical centre line approx. 40mm long on the wall Draw a horizontal line to mark the centre line for the screw holes approx. 30mm long.
Timer : repeatedly pressing the timer button will cycle through the 0.5,1,2,& 4 hour settings allowing a time selection of between 0.5 & 7.5 hours. At the end of the selected time the fan will stop. For continuous operation do not touch this button.
GENERAL SAFETY REQUIREMENTS Domestic wiring must be tested periodically by a qualified electrician at least once every 10 years or at every change of occupancy. For office and retail premises, and buildings such as village halls, the wiring must be inspected at least once every 5 years. It is recommended that all building be fitted with smoke alarms (it is mandatory for new buildings).
MAINTENANCE Before cleaning, turn the appliance off, and disconnect from the mains supply. The appliance may then be cleaned using a damp cloth with a drop of washing- up liquid to remove any dust or dirt from the case. Do no use stronger detergents or solvents as these may damage the paint finish.
If your product arrives damaged, you must contact the retailer from whom you bought it. The retailer's contact details will be on the invoice that arrived with the product, or on the e- mail you received when you placed the order. Do not contact Prem-i-air, only your retailer can arrange a replacement.