Table of Contents
Advertisement
Controlling the Projector through a LAN Environment
The projector supports Crestron® software. With correct settings for the LAN
Control Settings menu, you can manage the projector from a computer using a web
browser when the computer and the projector are properly connected to the same
local area network.
LS850WU / LS860WU
LS750WU
Configuring the LAN Control Settings
• If you are in a DHCP environment:
1. Take a RJ45 cable and connect one end to the RJ45 LAN input jack of the
projector and the other end to the RJ45 port.
2. Open the OSD menu and go to the
Press Enter to display the
to open the
LAN Control Settings
3. Highlight
LAN Settings
4. Press
to highlight Apply and press Enter.
5. Please wait for around 15 - 20 seconds, and then re-enter the
page. The Projector IP Address,
settings will be displayed. Make note of the IP address displayed in the
Projector IP Address row.
NOTE:
ADVANCED
LAN Control Settings
menu directly.
and press
/
to select
Subnet Mask, Default Gateway, DNS Server
40
>
LAN Control Settings
page. Or you can press
DHCP
ON.
LAN Settings
menu.
Network
Advertisement
Table of Contents
