Adjusting The Projected Image; Adjusting The Projector's Height And Projection Angle; Auto-Adjusting The Image; Fine-Tuning The Image Size And Clarity - ViewSonic LS850WU User Manual

Adjusting the Projected Image

Adjusting the Projector's Height and Projection Angle

The projector is equipped with one (1) adjuster foot. Adjusting the foot will change
the projector's height and the vertical projection angle. Carefully adjust the feet to
fine tune the projected image's position.

Auto-Adjusting the Image

Sometimes, you may need to improve the picture quality. To do this, press Auto
Sync on the remote control. Within five (5) seconds, the built-in Intelligent Auto
Adjustment function will re-adjust the Frequency and Clock values to provide the
best picture quality.
Upon completion, the current source information will appear in the upper left
corner for three (3) seconds.
NOTE:
This function is only available when the PC D-Sub input source (analog RGB/
COMPUTER IN) is selected.

Fine-Tuning the Image Size and Clarity

To adjust the projected image to the size that you need, rotate the Zoom Ring.
LS750WU LS850WU/LS860WU
To improve the clarity of the image, rotate the Focus Ring.
LS750WU LS850WU/LS860WU
36