Table of Contents
Advertisement
Menu Option
LAN Control Settings
Light Source Settings
Description
LAN Settings
ͫ DHCP ON: Select this if you are in a DHCP environment
and Projector IP Address,
DNS Server settings will be automatically retrieved.
ͫ Static IP: Select this if you are in a non-DHCP environment
and make adjustments to below settings.
Projector IP Address
Subnet Mask
Default Gateway
DNS Server
Standby LAN Control
Allows the projector to provide the network function in
standby mode.
Apply
Enacts the settings.
Light Source Mode
ͫ Normal: Provides full light source brightness.
ͫ Eco:
Reduces light source power consumption by 30% and
lowers brightness to decrease the fan noise.
ͫ Dynamic Eco: Reduces light source power consumption by
up to 30% depending on the content brightness level.
ͫ Custom: Allows you to adjust the light source power.
Light Source Power
Only available when Light Source Mode is Custom.
Reset Light Source Hours
Resets the light source timer after new light source is installed.
For changing the light source, please contact qualified service
personnel.
Light Source Hours Information
ͫ Light Source Usage Time: Displays the number of hours
the light source has been used.
Subnet Mask, Default Gateway,
Only available when LAN Settings is
set to Static IP. Use
column and use
value.
72
/
to select a
/
to adjust the
Advertisement
Table of Contents
