Controlling The Projector Through A Web Browser - ViewSonic LS850WU User Manual

Controlling the Projector through a Web Browser

Once you have the correct IP address for the projector and the projector is on or in
standby mode, you can use any computer that is on the same local area network to
control the projector.
NOTE:
• If you are using Microsoft Internet Explorer, make sure it is version 7.0 or higher.
• The screen shots in this manual are for reference only, and may differ from the
actual design.
• Please pay attention to the limitation of input length (including space and other
punctuation keys) in the list below:
Category Item
Network Settings
Email Alert
NOTE:
/ > < $ % + \ ' " " ' are prohibited.
1. Enter the address of the projector in the address bar of your browser and press
Input Length
DHCP/Manual
IP Address
Subnet Mask
Network
Gateway
DNS Server
AMX device discovery (N/A)
Administrator
Password New Password
Confirm Password
SysLocation
SNMP SysName
SysContact
To
Cc
Email Setting
Subject
From
Server
SMTP Setting User Name
Password
Fan Error
Light Source Error
Alert Condition Over Temperature
Submit
Issue Test Mail
42
Maximum Number
of Characters
(N/A)
15
15
15
15
(N/A)
4
4
22
22
22
40
40
40
40
30
21
14
(N/A)
(N/A)
(N/A)
(N/A)
(N/A)