Controlling The Projector Through A Lan Environment; Configuring The Lan Control Settings - ViewSonic PG707W User Manual

Controlling the Projector through a LAN Environment

The projector supports Crestron® software. With correct settings for the LAN
Control Settings menu, you can manage the projector from a computer using a web
browser when the computer and the projector are properly connected to the same
local area network.

Configuring the LAN Control Settings

• If you are in a DHCP environment:
1. Take a RJ45 cable and connect one end to the RJ45 LAN input jack of the
projector and the other end to the RJ45 port.
2. Open the OSD menu and go to the
Press Enter to display the
to open the LAN Control Settings
3. Highlight LAN Settings
4. Press to highlight Apply and press Enter.
5. Please wait for 15 - 20 seconds, and then re-enter the
Projector IP Address,
be displayed. Make note of the IP address displayed in the Projector IP Address
row.
ADVANCED
LAN Control Settings
menu directly.
and press /
Subnet Mask, Default Gateway, DNS Server
37
> LAN Control Settings
page. Or you can press
to select DHCP ON.
LAN Settings
menu.
Network
page. The
settings will