Shutting Down the Projector
1. Press the Power or Off button and a confirmation message will appear to prompt
you to press the Power or Off button a second time. Additionally you can press
any other button to cancel.
NOTE:
If you do not respond in a few seconds after the first press, the message will
disappear.
2. Once the cooling process finishes, a "Power On/Off Ring Tone" will play.
3. Disconnect the power cord from the power outlet if the projector will not be
used for an extended period of time.
NOTE:
• To protect the light source, the projector will not respond to commands during
the cooling process.
• Do not unplug the power cord before the projector completely shuts down.
34