Table of Contents
Advertisement
Quick Links
I N S T A L L A T I O N I N S T R U C T I O N S
Instrucciones de instalación
Installationsanleitung
Instruções de Instalação
Automated Dual Horizontal Door System
This device complies with part 15 of the FCC rules. Operation is subject to the following 2 conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio or television
communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment to an outlet on a circuit other than that to which the receiver is connected
Consult the dealer or and experienced radio/TV technician for help
Istruzioni di installazione
Installatie-instructies
Instructions d´installation
CM6DH SERIES
Advertisement
Table of Contents
Related Manuals for CHIEF CM6DHXX-T
Summary of Contents for CHIEF CM6DHXX-T
- Page 1 I N S T A L L A T I O N I N S T R U C T I O N S Instrucciones de instalación Installationsanleitung Instruções de Instalação Automated Dual Horizontal Door System This device complies with part 15 of the FCC rules. Operation is subject to the following 2 conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
-
Page 2: Important Warnings And Cautions
CM6DH SERIES CSAV, Inc., and its affiliated corporations and subsidiaries (collectively, "CSAV"), intend to make this manual accurate and complete. However, CSAV makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. -
Page 3: Tools Required For Installation
CM6DH SERIES Installation Instructions TOOLS REQUIRED FOR INSTALLATION 1/2" (12.7mm) PARTS A (1) B (1) G (1) C (2) F (2) D (1) 08 x 1/2" E (1) -
Page 4: Cabinet Considerations
CM6DH SERIES INSTALLATION Cabinet Considerations Header must not extend beyond top of track. Guide wheel must have free play in toe space. Doors must not exceed 50 lbs (each). Allow ample room for drawers to open past doors, and for doors to move in front of cabinet, as well as above floor or carpet. - Page 5 Installation Instructions CM6DH SERIES Figure 1...
- Page 6 CM6DH SERIES Installation Instructions Figure 2...
- Page 7 Installation Instructions Hanging and Adjusting Doors Remove door hanger from mechanism by removing locking screws and washers. (See Figure 3) Locking Screws and Washers Door Hanger Figure 3 Center door hanger to top of door and secure with eight flat head screws of sufficient length to support weight of door.
-
Page 8: System Activation
CM6DH SERIES Figure 7 IR Sensor Placement The placement of the IR sensor can be crucial to proper operation of the system. A flexible IR sensor is provided to make it easier to achieve reliable operation. In most applications, the IR sensor may be installed on top of the cabinet. -
Page 9: System Controls And Indicators
Installation Instructions Activator Figure 10 Press the "Open Door" button on the Remote Control. NOTE: If a different travel distance is required see "Door Travel Adjustment below. ADJUSTMENTS Adjust Door Travel Distance To adjust door travel distance: Press and hold the activator button on the front of the motor box for 13 seconds. - Page 10 CM6DH SERIES track, or is the motor box bent, causing it to become uncoupled from the track? Power Loss - The Status Light will be on solid red. ---- There has been a power loss (due to an electrical storm, etc.). When next activated the doors will move at a slow speed to their full closed position.
- Page 11 Installation Instructions CM6DH SERIES...
- Page 12 CM6DH SERIES 8820-000022 RevA 2007 Chief Manufacturing www.chiefmfg.com 11/07 USA/International A 8401 Eagle Creek Parkway, Savage, MN 55378 P 800.582.6480 / 952.894.6280 F 877.894.6918 / 952.894.6918 Europe A Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands P +31 (0)40 2668620 F +31 (0)40 2668615...
Need help?
Do you have a question about the CM6DHXX-T and is the answer not in the manual?
Questions and answers