Table of Contents
Advertisement
r Saving the scene file by overwriting a file on the SD card
Overwrites the file selected in the list of the scene files saved on the SD card with the current setting values of the camera.
1
Select the [OTHERS] menu → [FILE] → [SCENE FILE(SD CARD)] → [SAVE].
The list of scene files saved on the SD card is displayed.
2
Select the file to overwrite from the list of scene files.
The file name entry screen and the keyboard are displayed. Leave it as is when overwriting.
3
Select [Enter].
A confirmation screen is displayed.
4
Select [SET].
The file is saved.
Loading the scene file
The scene file saved in the camera memory or the SD card is loaded.
Loading the scene file from the camera memory
1
Select the [SCENE FILE] menu → [LOAD/SAVE/INITIALIZE] → [LOAD].
Loading the scene file from the SD card
1
Select the [OTHERS] menu → [FILE] → [SCENE FILE(SD CARD)] → [LOAD].
A list of scene files stored in the folder in the SD card is displayed.
2
Select the file name for the file to load.
3
Select either to load all scene files ([F1:] to [F6:]) or to load individually.
f To load all, select [ALL].
To load individually, select the scene number to load.
4
Select [SET].
The file is loaded.
f An error message may be displayed. For details about the error message, refer to "Warning system" (page 205).
Initialization of the scene file
Initializes the scene file saved in the camera memory.
1
Select the scene file to return to the factory setting in the [SCENE FILE] menu → [FILE SELECT].
2
Select the [SCENE FILE] menu → [LOAD/SAVE/INITIALIZE] → [INITIALIZE].
The confirmation screen is displayed.
3
Select [YES].
The selected scene file returns to the factory setting.
Changing the scene file name
Changes the name of the scene file saved in the camera memory.
Only changeable part is the title section of the scene file name. As an example, if the scene file name is [F6:HLG], only the "HLG" part can be changed.
1
Select the scene file to change the name in the [SCENE FILE] menu → [FILE SELECT].
2
Select the [SCENE FILE] menu → [NAME EDIT].
The file name entry screen and the keyboard are displayed.
3
Enter the text to set with the keyboard. (Maximum eight characters)
4
Select [Enter].
The file name is updated.
Returning the setting value of the menu to the factory setting
Most of the setting values of the menu can be returned to factory setting status.
Refer to "Target items for scene file/setup file/initialization" (page 111).
1
Select the [OTHERS] menu → [MENU INITIALIZE].
2
Select [SET] when the confirmation message is displayed.
Factory setting data is loaded.
@
NOTE
t Data saved as lens files in the camera memory are not deleted by performing this operation.
Chapter 5 Shooting — Scene file
– 163 –
Advertisement
Table of Contents
