Table of Contents
Advertisement
[1920×1080PsF]
[1280×720p]
(Factory setting: [1920×1080i])
@
NOTE
t For the combinations that can be set, refer to "Format that can be output from the <SDI OUT1> terminal" (page 180).
[3G-SDI OUT]
Sets the format of the 3G-SDI signal output from the <SDI OUT1> terminal.
Can be set when the 3G-SDI signal is output.
[LEVEL-A]
[LEVEL-B]
(Factory setting: [LEVEL-B])
[SDI REC REMOTE]
Sets if the recording operation against the external equipment connected to the <SDI OUT1> terminal (such as recorder) is to be controlled or not.
[ON]
[OFF]
(Factory setting: [OFF])
@
NOTE
t This cannot be set when set to the [RECORDING] menu → [REC FUNCTION] → [REC MODE] → [INTERVAL].
[SDI OUT CHAR]
Sets whether to superimpose the character to the output from the <SDI OUT1> terminal.
[ON]
[OFF]
(Factory setting: [OFF])
[SDI OUT ZEBRA]
Sets whether to superimpose the zebra signal to the output from the <SDI OUT1> terminal.
The setting of the zebra signal is in accordance with the following setting in the [VIDEO OUT/LCD/VF] menu → [EI ASSIST].
f [ZEBRA1 DETECT], [ZEBRA2 DETECT], [ZEBRA2]
[ON]
[OFF]
(Factory setting: [OFF])
[SDI OUT HDR]
Sets the signal to output from the <SDI OUT1> terminal.
[SDR]
[HDR]
(Factory setting: [HDR])
@
NOTE
t When the [SCENE FILE] menu → [GAMMA MODE SEL] is set to anything other than [HLG], the camera image is output in the standard dynamic
range.
[MARKER SW]
Marker is displayed in the output from the <SDI OUT1> terminal.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[SDI OUT2]
[OUTPUT SW]
Enables/disables the output from the <SDI OUT2> terminal.
[ON]
[OFF]
(Factory setting: [ON])
[OUT FORMAT]
Sets the signal to output from the <SDI OUT2> terminal. The item that can be selected varies depending on the [SYSTEM] menu → [FREQUENCY]/
[FILE FORMAT]/[REC FORMAT] setting.
Chapter 4 Operation — Menu settings
Outputs in 1920×1080PsF.
Outputs in 1280×720p.
Selects the LEVEL-A method.
Selects the LEVEL-B DL method.
Controls the recording operation of the external equipment.
Does not control the recording operation of the external equipment.
Superimposes.
Does not superimpose.
Superimposes.
Does not superimpose.
Outputs in the standard dynamic range.
Outputs in the high dynamic range.
Outputs the video.
Does not output the video.
– 84 –
Advertisement
Table of Contents
