Position Base - VXI V175 User Manual

CONNECT TO YOUR PHONE
• Dial a call on the phone as normal . Once the call is connected, you may replace the phone handset
(or turn the cordless handset off) .
– You can fine-tune the earpiece volume using the headset volume buttons .
– If additional microphone gain (speaking volume) is needed, or if you hear your voice echo in the
earpiece (excessive side tone), you can adjust this with the microphone volume buttons on the
side of the base .
• Press the call control button on the headset again to end the call .

Position Base

To reduce the possibility of noise and interference problems, position the base at least 6 inches away
from your desk phone and at least 12 inches away from your computer .
VXi V175 User Guide
(continued)
PAGE 13