Connect To A Computer; Position Base - VXI V300 Quick Start Manual

i.
In addition to the standard setup, there are three more options for setting up the V300
with your phone:
For more details, see the full user guide, available online at vxicorp.com/V300.
d. Connect to a Computer
i.
ii.
e. Pair to a Cell Phone
i. Press the Bluetooth button on the base. The Bluetooth indicator LED will be lit blue.
ii. Press the call control button on the headset.
iii. Press the Bluetooth icon at the bottom of the Pair button. You will hear the voice
iv. Open the Bluetooth menu on your device and tell it to search or "scan" for new devices.
v. Select "VXi V300" to pair the base with your device.
vi. Successful pairing and connection will be indicated by the voice prompt "Device
f. Position Base
To reduce the possibility of noise and interference problems, position the base at least 6 inches away
from your desk phone and at least 12 inches away from your computer.
204001X V300 Quick-Start Guide 122016.docx
Other Connection Configurations
a. Office Phone with EHS (sold separately)
b. Office Phone with L50 Lifter (sold separately)
c. Analog (Home) Phone
Connect USB
1. Plug the small connector on the end of the USB cable provided into the micro
USB port on the side of the base.
2. Plug the other end into the USB port on your computer.
3. Wait for your operating system to indicate that it has recognized the headset
and that it is ready to use.
Configure Computer Audio Settings
1. Press the PC button on the base. The PC indicator LED will be lit red.
2. Go to your computer's audio settings and make sure that "VXi V300" is selected
under both playback and recording.
3. If necessary, make sure the "VXi V300" is also selected for use in your
communications software settings.
prompt "Ready to Pair" and the blue LED on the Pair button will be flashing fast.
Connected" and the Bluetooth icon on the Pair button will be lit solid blue.
9