Page 1
VoxStar ™ U S E R G U I D E Compatible with most Bluetooth phones and Bluetooth-enabled computers (Windows or Macintosh ® ® ®...
Page 2
Standby Mode: Headset is on, Bluetooth link is active, and the user is not on a call (blue light flashes slowly). Talk Mode: Headset is in use with the cell phone while the cell phone is on an active call (blue light flashes slowly). VXi VoxStar UC User Guide...
12 Pairing with a Cell Phone 32 FCC Notice to Users Voice Dial 13 Pairing with BT2 USB 33 IC Notice to Adapter Transfer Audio Canadian Users 14 Multiple Device Pairing Turn Indicator Lights On/Off 15 Multipoint Mode VXi VoxStar UC User Guide...
Neckband/Behind-the-Neck Wearing Style Contoured Ear Buds (1 small, 1 medium, and 1 large) Ear Bud Adapter Ring 10. USB Charging Cable 11. AC Adapter 12. Quick-Start Guide (not shown) Images are not shown to scale VXi VoxStar UC User Guide...
Positioning is important; small adjustments in microphone placement can improve performance. The VXi VoxStar UC offers three wearing styles to ensure optimal fit and comfort: earhook, headband and neck band. To attach the headset to the wearing style of your choice, please refer to the following photos.
Over-the-head wearing style: Attach to headband as shown. Add foam or rubber ear cushion. Place the ear hook over your ear and mold it so it fits securely and comfortably. Optional cheek pad goes here VXi VoxStar UC User Guide...
Page 7
OTHER WEARING STYLES Behind-the-neck wearing style: Attach to headband as shown. Add foam or rubber ear cushion. Optional cheek pad goes here VXi VoxStar UC User Guide...
Headset Charging Port (less than 3 minutes). When the indicator turns blue—and stays blue—the unit is fully charged. It could take approximately 2.5 hours to achieve a complete charge. USB Charging Cable & AC Adapter VXi VoxStar UC User Guide...
BATTERY POWER INDICATORS While charging, the MFB’s indicator light shows the level of battery power on your VXi VoxStar as follows: Blue light: Fully charged. Over 7 hours’ talk time. Red light: Less than a full charge. For best performance, keep charging headset when not in use.
Microphone Mute/Un-Mute While on a call, hold down the Volume Up/Mute button for 2 seconds until you hear a beep. A mute reminder beep will be heard every 10 seconds. Repeat to un-mute. VXi VoxStar UC User Guide...
Turn Headset Off (conserves battery power): Hold down the MFB for approximately 3-4 seconds until you hear a voice prompt (in English), “Power off.” A red light will flash 4 times and the headset will turn off. VXi VoxStar UC User Guide...
“Yes” on the phone if prompted to connect to the headset. When connected, you’ll hear the voice prompt (in English), “Your headset is connected,” and the blue light will flash slowly (once every 3–4 seconds), indicating that the headset is in Standby Mode and ready to make or receive calls. VXi VoxStar UC User Guide...
PAIRING WITH BT2 USB ADAPTER Your VoxStar UC headset is pre-paired with the BT2 USB Adapter. If you need to re-pair your headset, or pair the BT2 with a different headset, follow these steps: Place the headset into pairing mode.
MULTIPLE DEVICE PAIRING The VXi VoxStar UC can pair with up to 8 devices at the same time; however, only one device may be connected to the headset at a time, unless the headset is in Multipoint Mode. Once all devices are paired, the headset will connect to the devices in reverse order of pairing. For instance, if device A, B and C were paired in that order, connection will be established to C first.
If you have not already done so, pair the headset with the devices you want to use. Once all this is completed, when you next power on the headset, you should hear the voice prompt (in English) “Your headset is connected” as it connects to each device. VXi VoxStar UC User Guide...
Page 16
DISABLING MULTIPOINT MODE Disabling Multipoint Mode does not affect device pairings. Repeat steps 1–3 for enabling Multipoint Mode. If successful, you should hear a 4 descending tone “fanfare.” Power off the headset. Multipoint Mode is now disabled. VXi VoxStar UC User Guide...
The headset lights will rapidly flash blue. The headset initiates pairing activity, and the user has to accept the incoming pairing invitation on the phone. NOTE: This may include entering the pin number “0000” (four zeros). VXi VoxStar UC User Guide...
Dial the phone and make a call as usual. Or use the headset’s Voice Dial function (if your phone supports it) to make a call. To end call, quickly press the MFB on the headset and release. You will hear falling tones. The call will end and the headset will enter Standby Mode. VXi VoxStar UC User Guide...
MFB and release. You will hear 2 rising tones (and the MFB button will blink blue every second). To end the call, quickly press the MFB on the headset and release. You will hear falling tones and the headset will enter Standby Mode. VXi VoxStar UC User Guide...
OPERATION WHILE USING THE CHARGER/ADAPTER The VoxStar UC headset will operate from battery power or from the AC/DC charger/adapter. NOTE: Do not attach the charger mid-call. This will cause the headset to reset, and the call will be sent back to the phone.
Clearly speak the command. Repeat quick press of the MFB to end Voice Dial. The headset must be in Standby Mode to use this feature. More functions on page 22 VXi VoxStar UC User Guide...
It is also possible to reconnect to the device with a quick press of the head- set’s MFB. A tone and the voice prompt (in English), “Your headset is connected,” will be heard and the two devices should connect. VXi VoxStar UC User Guide...
NOTE: Pairing information for devices previously paired with the headset will be lost. Headset will need to be paired to the device after reset has occurred. If Multipoint Mode was enabled at the time of reset, the headset will remain in Multipoint Mode. VXi VoxStar UC User Guide...
To reject an incoming call while on an active call, press and hold the MFB button for 2 seconds. The incoming call will go to voicemail, if available and supported by your cell phone. VXi VoxStar UC User Guide...
Standby Time: Up to 195 hours on a 2.5 -hour charge. BT2 USB Adapter Range: Up to 66 feet Interface: USB and Bluetooth OS Support: Windows XP SP3 or higher, Mac OSX 10.4 or higher VXi VoxStar UC User Guide...
Blue, quick “Your headset is Connect to A2DP NONE connected” double flash Volume Up Volume Up (quick press) NONE Single tone NONE Volume Down Volume Down (quick press) NONE Single tone NONE VXi VoxStar UC User Guide...
Page 27
MFB (quick press) Two rising tones NONE Active Call per second Blue flash, every End a Call MFB (quick press) Two falling tones NONE 4 seconds Reject a Call MFB (2 seconds) NONE Two falling tones NONE VXi VoxStar UC User Guide...
Page 28
Blue, double flash NONE from Device disconnected.” Two tones, and Link Loss NONE Red, slow flash then one tone every NONE 10 seconds. Long, high tone Low Battery NONE Red, fast flash “Battery low” @ 20 seconds VXi VoxStar UC User Guide...
Page 29
MFB / Volume Up Disable & Volume Down NONE 4 falling tones NONE Multipoint Mode (5-6 seconds) Start Proximity 2 half-second MFB (2–3 seconds), then Blue, rapid flash “Discovering” Volume Down (quick press) (RSSI) Pairing low tones VXi VoxStar UC User Guide...
Page 30
BT2 USB Adapter LED Indicators Function LED Indicator Adapter not connected to headset Steady on/off flash Adapter connected to headset Long on/short off flash Adapter in pairing mode Fast flash VXi VoxStar UC User Guide...
(1) VXi warrants that your VXi VoxStar UC headset system will be free from defects in material and workman- ship for one year from the date of purchase. If, during the first year from the date of purchase, your VXi VoxStar UC headset system fails to work due to a defect in material or workmanship, VXi will repair or replace the product, at its election, free of charge.
Users are not permitted to make changes or modify the device in any way. Changes or modifications not approved by VXi Corporation will void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules.
This device complies with RSS-310 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. This Class B digital apparatus complies with Canadian ICES-003 (Cet appareil numérique de la classe B conforme à la norme NMB-003 du Canada). VXi VoxStar UC User Guide...