Making Calls With An Analog (Home) Phone; Place A Call; Answer A Call; End A Call - VXI V175 User Manual

MAKING CALLS WITH AN ANALOG (HOME) PHONE

Place a Call

• Lift the phone's handset (if cordless, activate the handset) .
• Press the call control button on the headset and listen for a dial tone in the headset . Dial the desired
number on your phone . You will hear the call in the headset .
• Once the call is connected, you may replace the phone handset, or turn the cordless handset off .
• To end the call, either press the headset call control button, or replace the headset in the base-charging
cradle .

Answer a Call

• When you receive a call, you will hear ringtones in the headset . Press the headset call control button
once to answer the call .
• To end the call, either press the headset call control button, or replace the headset in the base-charging
cradle .

End a Call

• To end a call, either press the headset call control button, or replace the headset in the base-charging
cradle .

Mute a Call

• During a call, you can place the headset into mute by pressing the mute button .
• The mute indicator on the base will light and you will hear a short beep in the headset every 15 seconds
until mute is deactivated .
• To unmute, press the mute button on the headset again .

Answer a Second Incoming Call

• While on a call, you will hear a beep in your headset if you have an incoming call . Press and hold the
mute button on the headset to put your current call on hold and answer the new call .
Note: Only available with standard (analog) telephone lines. Feature may be dependent on your telephone
provider subscription.

Switching a Call Between Headset and Handset

• To switch a call from the headset to the handset without hanging up the call, first lift the telephone
handset (or activate cordless handset) . Then, press the headset call control button or place the headset
in the base-charging cradle .
VXi V175 User Guide PAGE 15