Connect To A Computer; Position Base - VXI V200 User Manual

CONNECT TO YOUR PHONE AND COMPUTER

Connect to a Computer

Connect USB
1 . Plug the small connector on the end of the USB cable provided into the micro USB port on the side of
the base .
2 . Plug the other end into the USB port on your computer .
3 . Wait for your operating system to indicate that it has recognized the headset and that it is ready to use .
Configure Computer Audio Settings
1 . Press the PC button on the base . The PC indicator LED will be lit red .
2 . Go to your computer's audio settings and make sure that "VXi V200" is selected under both playback
and recording .
3 . If necessary, make sure the "VXi V200" is also selected for use in your communications software
settings .

Position Base

To reduce the possibility of noise and interference problems, position the base at least 6 inches away from
your desk phone and at least 12 inches away from your computer .
VXi V200 User Guide
(continued)
PAGE 13