Related Manuals for Pulsar POE1648
Summary of Contents for Pulsar POE1648
- Page 1 POE1648 v.1.0 PoE 48V/6A PoE power supply for up to 16 IP cameras EN** Edition: 1 from 09.02.2016 Supersedes the edition: -----------...
- Page 2 POE1648 PSU features: protections: the 16x0,35A/48V DC power output for powering 16 cameras IP SCP short-circuit protection output voltage adjustment 41V÷ 56V DC OVP overvoltage protection Surge protection Wide range of supply voltage: 90÷264V AC ...
- Page 3 POE1648 1. Technical description. 1.1. General description. The PSU is designed for supply of up to 16 cameras IP requiring stabilized voltage of 48V DC. The output 41V÷56V DC. The power is carried over the spare pairs (4/5 &...
- Page 4 POE1648 Fig. 2. Components arrangement. Fig. 3. The view of the PSU. Component No. Description [Fig. 3] The module of the switch mode PSU L-N power-supply connector 230V/AC, PE protection connector LED light indicating correct operation of the switch mode PSU potentiometer –...
- Page 5 POE1648 1.4 Technical parameters. - electrical parameters (Table 3) - mechanical parameters (Table 4) - safety of use (Table 5) - operation parameters (Table 6) Electrical parameters (Table 3). 90÷264V AC Mains supply Current consumption 2A@230V AC type PSU’s power 269W max.
- Page 6 POE1648 2. Installation. 2.1. Requirements. The buffer PSU should be mounted by a qualified installer, holding relevant permits and licenses (applicable and required for a given country) for 230V/AC and low-voltage installations. The unit should be mounted in confined spaces, in accordance with the 2nd environmental class, with normal relative humidity (RH=90% maximum, no condensation) and temperature range from -10°C up to +40°C.
- Page 7 POE1648 5. In case of significant voltage drops on the receivers’ power cables resistance, it is possible to adjust the voltage potentiometer (41÷56V DC). with the V 6. Check the optical indication of the PSU status. 7. Close the cover after installing and checking the operation of the power supply.
- Page 8 GENERAL WARRANTY CONDITIONS 1. Pulsar (manufacturer) grants a two-year quality warranty for the equipment, starting from the production date. 2. The warranty includes free-of-charge repair or replacement with an appropriate equivalent (selected by the manufacturer) if the malfunction is due to the manufacturer.
Need help?
Do you have a question about the POE1648 and is the answer not in the manual?
Questions and answers