Troubleshooting - Bissell 9400-3 User Manual

T
roubleshooting
Built-in heater ready light does not illuminate
Possible Cause
1. The heater switch is not turned ON ( I ).
2. The power switch is not turned ON ( I ).
Reduce Spray or No Spray
Possible Cause
1. Water tank may be empty.
2. Formula tank may be empty.
3. Tank may not be seated completely.
4. Pump may have lost prime.
DirtLifter PowerBrushes do not turn
Possible Cause
1. The brush is off or broken.
2. The unit is in the upright position.
3.
Circuit breaker may have tripped.
w w w . b i s s e l l . c o m
WARNING:
To reduce the risk of fire,
electric shock or injury
unplug from outlet before
servicing.
Remedies
1. Turn the heater switch ON ( I ).
2. Both switches must be ON ( I ) to
activate the heater ready light.
Remedies
1. Fill heavy duty bladder with hot
tap water.
2. Fill formula tank with BISSELL Fiber
Cleansing Formula for cleaning.
3. Turn power OFF ( O ). Remove and
reseat tank.
4. Turn power OFF ( O ) and then back
ON ( I ). Wait one minute, then
depress Trigger.
Remedies
1. Turn power OFF ( O ) and unplug unit
from outlet. Follow instructions on
page 17.
2. Brushes only rotate when unit is
reclined using the detent pedal.
3.
Turn the machine OFF ( O ) and
unplug from outlet. Check to see if
foreign object is caught in brush roll.
Remove object. Plug machine back in
to reset circuit breaker.
8 0 0 . 2 3 7 . 7 6 9 1
19