Calibration & Warranty - Factair F4504 Operating Manual

Calibration and Warranty
Multi-Air Testers leave our factory with a 12-month warranty and calibration certificate. Our
standard turnaround on annual calibration is 10-15 working days providing there is no major damage
that requires an extensive rebuild.
Note:- Please download all stored data before returning the Tester to Factair.
Temperature Parameters
Storage: -5/+40°C
In regards to operating temperature please note stated Draeger tube accuracy is based on a test
temperature range between 15 to 25°C
This tester is calibrated for the following approved reagent tubes/Impactor.
Test
Carbon Monoxide
Carbon Dioxide
Oil (Impactor)
Oil (chemical reagent tube)*
Nitrous Fumes
Sulphur Dioxide
Polytest
Hydrogen Sulphide
**Note:- The tester can also be used with the old type Draeger reagent tube for oil, ref.6728371.
(Refer to Appendix 2 at the rear of the manual for instructions.)
IMPORTANT – IT IS RECOMMENDED THAT YOUR MULTI-AIR TESTER IS RETURNED FOR
RECALIBRATION AND SERVICING WITHIN 12 MONTHS FROM THE ISSUE DATE OF ITS CALIBRATION
Operating Range: +5/+40°C
Draeger ref.
CO 6728511
CO 6728521
2
8103560
6728371
NO 8103661
x
SO 6728491
2
CH28401
H S 6728041
2
CERTIFICATE
Factair Part Sensitivity
No:
TUB0004 5-150 ppm
TUB0005 100-3000 ppm
TUB0053 0.1 mg/m
TUB0003 0.1 mg/m
TUB0068 0.2-6 ppm
TUB0014 1-25 ppm
TUB0017 Sensitivity
compound present
TUB0020 0.5-15ppm
4
3
3
dependant on