Factair F4504 Operating Manual page 22

Once the test is complete push the button
corresponding to each chemical reagent tube /
Impactor.
Input the reading from the tube / Impactor and
press the arrow icon in the top right hand corner
of the screen.
For the oil and polytest tubes select the
appropriate pass or fail icons.
After you have entered each result that box will
change from red to green. Once you have
completed entering all the results press the arrow
icon in the top right hand corner of the screen.
you enter each result the
Note:- Instructions on reading the Impactor can be found in Appendix 4 at the back of the manual.
21