Table of Contents
Advertisement
When complete you can save the test result file and if required print off a certificate.
Once loaded further information can be added
about the following:-
Test location.
Date next test due.
Test engineer and relevant address.
These details can be saved as default.
For each "Airline" test you will need to confirm
whether the recorded test volume and pressure
was sufficient for the RPD by selecting pass or
fail as appropriate.
Note:- In addition there is an option of entering
N/A against these categories. In this instance
the resultant test certificate will only validate air
quality and exclude validation of the pressure
and flow.
In the UK, for breathing-air tests the Health and
Safety Executive guideline HSG53 recommends
test results should be retained for a minimum of
5 years.
26
Note:-
Advertisement
Table of Contents
