Table of Contents
Advertisement
BASIC OPERATIONS
Refer to Figures 6 - 7
Before Starting
• Place the dust collector near the dust producing
machine to be used.
• There are four hose adapters supplied. Select the hose
adapter that best fits the machine outlet and attach it to
the hose coupler.
Figure 6
Hose
Adapters
• Connect the dust collector adapter to the machine
outlet. Make sure the connection is secure.
• Make sure the machine is turned OFF.
• Connect the dust collector's power cord to the correct
power source.
GENERAL MAINTENANCE
WARNING
Make sure the machine is turned off and the cord is
disconnected from the power source before servicing and
removing/replacing any components on the machine.
• Check the dust collector daily for loose connections,
damaged wires, worn switch, full collection canister,
dirty filter cartridge/bag and any other unsafe condition.
CLEANING
Check and empty the collection canister on your dust
collector regularly. The machine operates at a much
higher level of efficiency when the collection canister is
empty.
Check and clean the filter cartridge/bag regularly. Replace
as needed.
OPERATION
To Start
• Place the dust collector's ON/OFF switch in the ON (I)
position.
• Turn the machine ON.
Figure 7
To Stop
IMPORTANT: ALWAYS turn the dust producing machine
OFF before turning the dust collector OFF.
• Turn the machine OFF.
• Place the dust collector's ON/OFF switch in the OFF (O)
position.
MAINTENANCE
LUBRICATION
The sealed bearings in the motor have been permanently
lubricated at the factory. They require no further
lubrication.
MACHINE STORAGE
• When the dust collector is not in use, disconnect the
cord from the power source and store the machine in a
dry place.
• Do not expose the machine to rain.
• Ensure the cord is kept away from potential damage
sources such as; sharp objects, chemicals, heat
sources and water.
TOOL REPAIRS
• If power cord is worn, cut, or damaged in any way, have
it replaced immediately.
• Replace any damaged or missing parts. Use parts list
to order parts. Any attempt to repair motor may create
a hazard unless repair is done by a qualified service
technician. Call the customer service line at
847-780-6120 for assistance.
5
5
On/Off
Switch
5
5
Advertisement
Table of Contents
