Dell E14S Series Owner's Manual page 71

Web-scale hyperconverged appliance
Table of Contents

Advertisement

CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Steps
1.
Loosen the screws that secure the integrated storage controller cable to the integrated storage-
controller card connector on the system board.
2.
Lift the integrated storage controller cable out.
3.
Lift one end of the card and angle it to disengage the card from the integrated storage-controller
card holder on system board.
4.
Lift the card out of the chassis.
Figure 25. Removing and installing the integrated storage controller card
1.
integrated storage controller cable
3.
integrated storage-controller card
connector on the system board
Next steps
1.
Replace the expansion-card riser 1.
2.
Replace the cooling shroud.
3.
Follow the procedure listed in
After working inside your
2.
integrated storage controller card
4.
integrated storage controller card
holder
system.
71

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xc630

Table of Contents