Battery Replacement and Disposal
When the low battery icon
hours of accurate readings are still possible in this condition; however, batteries should be
replaced as soon as possible:
Remove the two (2) Phillips screws from the rear of the meter (directly above the top of the
tilt stand).
Remove and safely place the battery compartment and screws where they will not be
damaged or lost.
Replace the six (6) 1.5V 'AA' batteries observing correct polarity.
Replace the battery compartment cover with the two (2) Phillips screws.
Disposal: Do not dispose of this instrument in household waste. The user is obligated to take end‐
of‐life devices to a designated collection point for the disposal of electrical and electronic
equipment.
Other Battery Safety Reminders
o Never dispose of batteries in a fire. Batteries may explode or leak.
o Never mix battery types. Always install new batteries of the same type.
888.610.7664
appears on the LCD, the batteries must be replaced. Several
Never dispose of used batteries or rechargeable batteries in household waste.
As consumers, users are legally required to take used batteries to appropriate
collection sites, the retail store where the batteries were purchased, or wherever
batteries are sold.
www.calcert.com
15
10
20
5
25
0
30
10
SDL710-en-GB_V1.0 12/16
sales@calcert.co
Need help?
Do you have a question about the SDL710 and is the answer not in the manual?
Questions and answers