Battery Replacement and Disposal
When the low battery
of accurate readings are still possible in this condition; however batteries should be replaced as
soon as possible:
1.
Remove the two (2) Phillips screws from the rear of the meter (directly above the top of the tilt
stand).
2.
Remove and safely place the battery compartment and screws where they will not be damaged
or lost.
3.
Replace the six (6) 1.5V 'AA' batteries observing polarity.
4.
Replace the battery compartment cover with the two (2) Phillips screws.
Safety: Please dispose of batteries responsibly; never dispose of batteries in a fire, batteries may
explode or leak. If the meter is not to be used for 60 days or more, remove the battery and store
separately.
Never dispose of used batteries or rechargeable batteries in household waste.
As consumers, users are legally required to take used batteries to appropriate collection
sites, the retail store where the batteries were purchased, or wherever batteries are sold.
Disposal: Do not dispose of this instrument in household waste. The user is obligated to
take end-of-life devices to a designated collection point for the disposal of electrical and
electronic equipment.
icon appears on the LCD, the batteries must be replaced. Several hours
9
SDL300-en-GB_V1.6 5/17
Need help?
Do you have a question about the SDL300-NIST and is the answer not in the manual?