While On An Active Call; Using Call Hold; Transferring A Call - Nortel 1140E User Manual

While on an active call

Follow these procedures to put a call on hold, transfer a call, use the mute
key, and use the conference call feature.
See
Navigation
•
•
•
•

Using call hold

The Hold feature allows you to suspend a call without terminating it. Follow
this procedure to use the hold feature.
Step
1
2

Transferring a call

Follow this procedure to transfer a call to another extension.
Copyright © 2007, Nortel Networks
.
"IP Phone 1140E components" (page 11)
"Using call hold" (page 39)
"Transferring a call" (page 39)
"Using conference call " (page 40)
"Using the mute feature" (page 41)
Action
To put the call on hold, press the hold key.
The call is suspended. On the display, an indicator flashes beside
the line on which the call is held.
Press the key beside the flashing indicator in the display.
The call is active again.
Nortel IP Phone 1140E User Guide
NN10300-023 01.03 Standard
(I)SN09U 13 April 2007
—End—
Carrier VoIP
for the location of the keys.
Nortel Networks Confidential
39