Led Troubleshooting - Brother P-touch Embellish Elite PT-P715eBT User Manual

Appendix

LED Troubleshooting

Power
Lit/
Flashing
LED
Flashing twice
per second,
Battery failure
then off for
1 second
• No Ribbon/Tape Cassette
• Incorrect Ribbon/Tape Cassette
• Incompatible Ribbon/Tape
Insufficient charge
Flashing
(1 second
intervals) High temperature error
Red
Transmission error
Cutter error
Lit Program transfer failure
Flashing
(0.3 second System error
intervals)
Condition
installed.
installed.
Cassette installed.
How to Clear
an Error
If the problem is still not resolved,
replace the battery.
Lightly press the
Power Button.
Insert the correct Ribbon/Tape
Cassette.
Make sure you have removed the
Restart the label
protective sheet.
printer.
Charge the battery.
Wait a short while, then try again
Lightly press the
after the Power LED changes to
Power Button.
green.
When using a mobile device:
Establish a Bluetooth connection.
Restart the label
printer. When using a computer:
• Reconnect the USB cable.
• Change the USB port.
Restart the label printer.
Transfer the program again.
If the problem is still not resolved, contact Brother
customer service.
Contact Brother customer service.
(The flashing pattern may change if you touch the
Power Button.)
5
Solution
19