General Precautions - Brother P-touch Embellish Elite PT-P715eBT User Manual

Precautions
CAUTION
Failure to observe instructions and warnings could result in minor or moderate injuries.
Rechargeable Li-ion Battery
If liquid from the battery gets onto skin or clothes, immediately rinse them with water.
Label Printer and USB Cable
• Use the dedicated battery (PA-BT-005).
• When opening and closing the Cassette Cover, use caution to prevent your fingers from being trapped.
• Do not touch the Print Head.
• Do not touch the cutter blade or insert your fingers inside the Tape Exit Slot.

General Precautions

Label Printer, Ribbon Cassette, Tape Cassette, or USB Cable
• Do not use in any way or for any purpose not described in this guide. Doing so may result in accidents or damage.
• Use Brother Ribbon Cassettes or Tape Cassettes.
• Do not put any foreign objects into the Tape Exit Slot, the USB Port, battery compartment, etc.
• DO NOT use, charge, or store the product:
- Where it may come into contact with liquids
- Where condensation forms
- Where there is a lot of dust
- Where the temperature or humidity are extreme. See Product Specifications
- Near flames, a heater or in direct sunlight
• Do not try to print if the cassette is empty; it will damage the Print Head.
• Do not pull the ribbon/tape while printing or feeding; it will damage the ribbon/tape and the label printer.
• The length of a printed ribbon/label may differ from the displayed ribbon/label length.
• Depending on the location, material, and environmental conditions, labels may unpeel or become irremovable, or
the color may change or be transferred to other objects. Before applying labels, check the environmental conditions
and the material.
• When printing multiple copies of a ribbon/label, the label printer will not detect the end of the Ribbon/Tape Cassette
and will continue printing.
• Printed characters may look different than previewed, as your device's or computer's screen may have a higher
resolution than the label printer.
• Printed small text may not be as clear as it is displayed.
• White and Gold printed objects may not always print clearly.
• The backing of some types of tapes may be pre-cut to make it easier to peel the backing. To remove the backing,
simply fold the label lengthwise with the text facing inwards to expose the inside edges of the backing. Next, peel
off the backing one piece at a time.
• Labels may be difficult to attach to surfaces that are wet, dirty, or uneven. The labels may peel off easily from these
surfaces.
• For rough and textured surfaces, we recommend using Extra Strength Adhesive Tape.
• Be sure to read the instructions provided with Ribbon, Fabric Tapes, Extra Strength Adhesive Tapes, or other
special tapes and observe all precautions noted in the instructions.
1
2