Table of Contents
Advertisement
Quick Links
HSEUiREG07201
720W Lab Power Supply DIN-Rail
Features:
•
Real time voltage programming
•
Real time & value C/V-monitoring
•
Reference voltage f. autonomous programming
•
Remote Shutdown
•
Sense control 2V per load line
•
Power Good Relay DC-ok
•
Quick down programming option PS
Model
HSEUiREG07201.018
HSEUiREG07201.030
HSEUiREG07201.050
HSEUiREG07201.060
HSEUiREG07201.090
HSEUiREG07201.130
HSEUiREG07201.180
HSEUiREG07201.240
Camtec Power Supplies GmbH - Gewerbestrasse 30 - DE-76327 Pfinztal / Germany
Tel. +49 (721) 46596 - 0 Fax +49 (721) 46596 - 77
(Subject to alterations. This product is not designed to be used in applications such as life support systems wherein a failure or malfunction could result in injury or death)
Voltage programmable
0 – 18Vdc
0 – 30Vdc
0 – 50Vdc
0 – 60Vdc
0 – 90Vdc
0 – 130Vdc
0 – 180Vdc
0 – 240Vdc
www.camtec-gmbh.com
HSEUiREG07201(R2) MANUAL
•
Precise dynamics on load change
•
Series & parallel operation N+1
•
Natural convection
•
Electronic Inrush Limiter 13,8Arms
•
Up to 90% efficiency
•
EMI/EMS EN61000-6-2,3, EN55032 class B
•
EN61010-1, EN61010-2-201, EN62368-1
Current programmable
0 – 40,0A
0 – 30,0A
0 – 18,0A
0 – 15,0A
0 – 10,0A
0 – 7,0A
0 – 5,0A
0 – 3,8A
P.1/15 (03/2017.02.2)
-
info@camtec-gmbh.com
Advertisement
Table of Contents
Related Manuals for Camtec HSEUiREG07201.060
Summary of Contents for Camtec HSEUiREG07201.060
- Page 1 0 – 180Vdc 0 – 5,0A HSEUiREG07201.240 0 – 240Vdc 0 – 3,8A Camtec Power Supplies GmbH - Gewerbestrasse 30 - DE-76327 Pfinztal / Germany P.1/15 (03/2017.02.2) Tel. +49 (721) 46596 - 0 Fax +49 (721) 46596 - 77 www.camtec-gmbh.com info@camtec-gmbh.com...
-
Page 2: Technical Description
The components in the assembled device pass stress aging to achieve an even level and to prevent from delayed failures. Our internal product engineering guidelines provide a clear target: Camtec product reputation must say „mount and forget“. Quality is never a mere promise for our team. - Page 3 The operating mode is unit. signaled via LED. Camtec Power Supplies GmbH - Gewerbestrasse 30 - DE-76327 Pfinztal / Germany P.3/15 (03/2017.02.2) Tel. +49 (721) 46596 - 0 Fax +49 (721) 46596 - 77 www.camtec-gmbh.com...
-
Page 4: Technical Data Table
DC Terminals Output Screw Terminal 4x 0,5 – 16mm² AWG26 – AWG6 (+ + / - - ), technical data see “connections” Camtec Power Supplies GmbH - Gewerbestrasse 30 - DE-76327 Pfinztal / Germany P.4/15 (03/2017.02.2) Tel. +49 (721) 46596 - 0 Fax +49 (721) 46596 - 77 www.camtec-gmbh.com... - Page 5 LED Signal Indication Over Temp. Shut Down Constant [V] Constant [C] Camtec Power Supplies GmbH - Gewerbestrasse 30 - DE-76327 Pfinztal / Germany P.5/15 (03/2017.02.2) Tel. +49 (721) 46596 - 0 Fax +49 (721) 46596 - 77 www.camtec-gmbh.com info@camtec-gmbh.com (Subject to alterations. This product is not designed to be used in applications such as life support systems wherein a failure or malfunction could result in injury or death)
- Page 6 LED Indication Constant voltage Constant current Shutdown Over temperature Camtec Power Supplies GmbH - Gewerbestrasse 30 - DE-76327 Pfinztal / Germany P.6/15 (03/2017.02.2) Tel. +49 (721) 46596 - 0 Fax +49 (721) 46596 - 77 www.camtec-gmbh.com info@camtec-gmbh.com (Subject to alterations. This product is not designed to be used in applications such as life support systems wherein a failure or malfunction could result in injury or death)
- Page 7 The sense terminals are directly connected to the power outputs. Lokal Sensing Remote Sensing (factory setup) (twisted sense lines) Camtec Power Supplies GmbH - Gewerbestrasse 30 - DE-76327 Pfinztal / Germany P.7/15 (03/2017.02.2) Tel. +49 (721) 46596 - 0 Fax +49 (721) 46596 - 77 www.camtec-gmbh.com info@camtec-gmbh.com...
- Page 8 The alarm LED OT lits when the temperature of the power supply is higher than the over-temperature protection threshold. Camtec Power Supplies GmbH - Gewerbestrasse 30 - DE-76327 Pfinztal / Germany P.8/15 (03/2017.02.2) Tel. +49 (721) 46596 - 0 Fax +49 (721) 46596 - 77 www.camtec-gmbh.com...
-
Page 9: Temperature Derating
If the units are remotely controlled via the analog interface it is compulsory to use a potential-free control voltage! Camtec Power Supplies GmbH - Gewerbestrasse 30 - DE-76327 Pfinztal / Germany P.9/15 (03/2017.02.2) Tel. +49 (721) 46596 - 0 Fax +49 (721) 46596 - 77 www.camtec-gmbh.com... - Page 10 If the residual voltage is ≥60Vdc, observe the safety standards. Use only specially insulated screwdriver to trim the Ua/Ia. Camtec Power Supplies GmbH - Gewerbestrasse 30 - DE-76327 Pfinztal / Germany P.10/15 (03/2017.02.2) Tel. +49 (721) 46596 - 0 Fax +49 (721) 46596 - 77 www.camtec-gmbh.com...
-
Page 11: Available Options
Please request the help of your local HSEUiREG dealer or contact us directly: service@camtec-gmbh.com Camtec Power Supplies GmbH - Gewerbestrasse 30 - DE-76327 Pfinztal / Germany P.11/15 (03/2017.02.2) Tel. +49 (721) 46596 - 0 Fax +49 (721) 46596 - 77 www.camtec-gmbh.com... - Page 12 40 – 50% of the energy losses out of a system while using the Baseplate cooling bundle 2201002001 to hard mount the unit to a plane and heat conductive surface. Camtec Power Supplies GmbH - Gewerbestrasse 30 - DE-76327 Pfinztal / Germany P.12/15 (03/2017.02.2) Tel.
- Page 13 (The HSEUiREG is always delivered for DIN-rail mount, the back-plate is an optional part that shall be mounted from the customer. The threads from the DIN-rail mounting brackets shall be used. All screws are included into the Back-Plate Kit.) Camtec Power Supplies GmbH - Gewerbestrasse 30 - DE-76327 Pfinztal / Germany P.13/15 (03/2017.02.2) Tel.
-
Page 14: Ordering Information
Hart mount plate kit including screws 2201002001CA UI.DRIVE INTERFACE USB2.0 Interface & software download 3041093001CA Camtec Power Supplies GmbH - Gewerbestrasse 30 - DE-76327 Pfinztal / Germany P.14/15 (03/2017.02.2) Tel. +49 (721) 46596 - 0 Fax +49 (721) 46596 - 77 www.camtec-gmbh.com info@camtec-gmbh.com... - Page 15 All parameters after 15 minutes of continuous operation at full load / 25°C / 230Vac 50/60Hz, unless otherwise indicated. Camtec Power Supplies GmbH - Gewerbestrasse 30 - DE-76327 Pfinztal / Germany P.15/15 (03/2017.02.2) Tel.
Need help?
Do you have a question about the HSEUiREG07201.060 and is the answer not in the manual?
Questions and answers