Quantum LTO-3 Installation Manual page 18

LTO-3, LTO-4, LTO-5, LTO-6, LTO-7 and LTO-8
Figure 22 Installing the Rack
Rails in the Front of the Rack
18
Spring-loaded
tab
Note: To remove the rails for repositioning, push the spring-loaded tab on the outside
of the rack rail and slide it forward.
2 Extend the rack rails past the rear vertical mounting bar and insert the pins in the
mounting bracket into the previously marked holes in the rack.(see
rack rails will lock securely into place when the end of the rails are pushed forward.
Installing the 1U Rackmount Enclosure in a Rack
Figure 23). The