Electrical Safety - Black+Decker LD12SP Original Instructions Manual

ENGLISH
• Children should be supervised to ensure
that they do not play with the appliance.
Residual risks
Additional residual risks may arise when
using the tool which may not be included in
the enclosed safety warnings. These risks
can arise from misuse, prolonged use etc.
Even with the application of the relevant
safety regulations and the implementation
of safety devices, certain residual risks
cannot be avoided. These include:
• Injuries caused by touching any
rotating/moving parts.
• Injuries caused when changing any parts,
blades or accessories.
• Injuries caused by prolonged use of a
tool. When using any tool for prolonged
periods ensure you take regular breaks.
• Impairment of hearing.
• Health hazards caused by breathing dust
developed when using your tool
(example: working with wood, especially
oak, beech and MDF).
Labels on tool
The label on your tool may include the
following symbols:
Warning! To reduce the risk of injury,
the user must read the instruction
manual.
The charger is intended for indoor
use only.
Read this entire manual carefully
before using the appliance.
Position of date barcode
The Date Code, which also includes the year
of manufacture, is printed into the housing.
Example:
2017 XX JN
Year of manufacturing
6
(Original instructions)

Electrical safety

Your charger is double insulated;
therefore no earth wire is required.
Always check that the mains voltage
corresponds to the voltage on the rating
plate. Never attempt to replace the charger
unit with a regular mains plug.
• If the supply cord is damaged, it must be
replaced by the manufacturer or an
authorised BLACK+DECKER Service
Centre in order to avoid a hazard.
Features (Fig. A)
1. Switch
2. Forward/Reverse button
3. Keyless chuck
4. Charger
5. Charging and cell capacity indicator
Safety warnings and instructions
Batterie
• DO NOT disassemble or open, drop
(mechanical abuse), crush, bend or
deform, puncture, or shred.
• DO NOT modify or remanufacture,
attempt to insert foreign objects into the
battery, immerse or expose to water or
other liquids, or expose to fire, excessive
heat including soldering irons, or put in
microwave oven.
• Only use the battery with a charging
system specified by the
manufacturer/supplier.
• DO NOT short-circuit a battery or allow
metallic or conductive objects to contact
both battery terminals simultaneously.
• Dispose of used batteries promptly
according to the manufacturer/supplier's
instructions.
• Improper battery use may result in a fire,
explosion, or other hazard.
• Battery usage by children should be
supervised.