Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Black+Decker BCD003
Summary of Contents for Black+Decker BCD003
- Page 1 BCD003...
-
Page 3: Intended Use
Intended use b. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and Your BLACK+DECKER BCD003 impact drill has been refrigerators. There is an increased risk of electric designed for screwdriving and drilling applications. This tool is shock if your body is earthed or grounded. - Page 4 ENGLISH (Original instructions) c. Prevent unintentional starting. Ensure the switch is f. Keep cutting tools sharp and clean. Properly in the off-position before connecting to power maintained cutting tools with sharp cutting edges are source and/or battery pack, picking up or carrying less likely to bind and are easier to control.
-
Page 5: Residual Risks
(Original instructions) ENGLISH Service Š Do not operate this tool for long periods of time. Vibration caused by tool action may be harmful to your hands a. Have your power tool serviced by a qualified repair and arms. Use gloves to provide extra cushion and limit person using only identical replacement parts. - Page 6 Š If the supply cord is damaged, it must be replaced by the Š Never attempt to open for any reason. manufacturer or an authorised BLACK+DECKER Service Š Do not expose the battery to water. Centre in order to avoid a hazard.
-
Page 7: Important Charging Notes
(Original instructions) ENGLISH Warning! fire Hazard. When removing the battery where the surrounding air temperature is from the charger, be sure to unplug the charger approximately 18 ° – 24 °C; from the outlet first, then remove the battery from If charging problems persist, take the tool, battery the charger. -
Page 8: Troubleshooting
ENGLISH (Original instructions) Š For drilling in wood, metal and plastics, set the collar to Š Use appropriate and required safety equipment, as the drilling position symbol instructed in the Safety Instructions. Š For screwdriving, set the collar to the desired setting. If you Š... -
Page 9: Maintenance
) 98.5 dB(A), uncertainty (K) 5 dB(A) depleted Maintenance Vibration total values (triax vector sum) according to EN 62841: Your BLACK+DECKER tool has been designed to operate Drilling into concrete (a ) 14.2 m/s , uncertainty (K) 1.5 m/s h, ID over a long period of time with a minimum of maintenance. - Page 12 Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place +64 9 259 1122 Mt Wellington Auckland 1060 United Kingdom &...
Need help?
Do you have a question about the BCD003 and is the answer not in the manual?
Questions and answers