Applications - Axis Q35 Series User Manual

AXIS Q35 Series
Setup
How to detect tampering with input signal
This example explains how to trigger an alarm when the input signal has been cut or short-circuited. For more information about the
I/O connector, see page 18.
1. Go to Settings > System > I/O Ports and enable Supervised I/O for one of the ports.
Create an action rule:
2. Go to Settings > System > Events and create an action rule.
3. Type a name for the action rule.
4. From the list of triggers, select Input Signal and then Supervised input port. Set Tampered to Yes.
5. From the list of schedules, select Always.
6. From the list of actions, select Send Notification and then select a recipient or create a new recipient.
7. Click OK.
How to record video when the camera detects impact
Shock detection allows the camera to detect tampering caused by vibrations or shock. Vibrations due to the environment or to an
object can trigger an action depending on the shock sensitivity range, which can be set from 0 to 100. In this scenario, someone is
throwing rocks at the camera after hours and you would like to get a video clip of the event.
1. Go to Settings > System > Detectors.
2. Set shock detection to on, and set a value for the shock sensitivity.
Create an action rule:
3. Go to Settings > System > Events and add an action rule.
4. Type a name for the action rule.
5. From the list of triggers, select Detectors and then select Shock detection.
6. From the list of schedules, select After Hours.
7. From the list of actions, select Send Video Clip.
8. Select an existing stream profile or create a new one.
9. Enable and set the pre-trigger time to 5 seconds.
10. Enable While the rule is active.
11. Enable and set the post-trigger time to 60 seconds.
12. Select an existing recipient or create a new one.
13. Click OK.

Applications

About applications
AXIS Camera Application Platform (ACAP) is an open platform that enables third parties to develop analytics and other applications
for Axis products. To find out more about available applications, downloads, trials and licenses, go to axis.com/applications
To find the user manuals for Axis applications, go to axis.com
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
12