Technika TGO910TBK User Manual page 12

Clock functions
Countdown
To set a countdown. A signal sounds after the time has elapsed. This function does
not affect the operation of the oven.
Cook time
To set how long the oven is to be in use.
End time
To set when the oven is to switch off.
Timer
To set, change or check the time (See also section "Before Using for the First Time")
General instructions
• After a clock function has been selected, the corresponding symbol flashes for approx. 5
seconds. During this time, the desired times can be set or modified using the
• When the desired time has been set, the symbol continues to flash for approx. 5 seconds.
After this the symbol lights up. The set Countdown
• The time set for Cook time
function starts.
Countdown
1. The countdown timer is only available with the oven in standby mode. Press the clock.
Functions button . The bell symbol
2. Set the desired Countdown time using the
After approx. 5 seconds the display shows the time remaining.
The symbol for Countdown
When the set time has elapsed, the alarm will sound 30 times. Press any button to stop the
alarm.
Cook time
1. Select an oven function and using the
2. Press the Clock Functions
3. Using the or
The oven switches itself on. The symbol for Cook time
By repeatedly pressing the Clock Functions
When the time has elapsed, an audible signal sounds 3 times.
The oven switches itself off.
"0.00" is displayed and the symbol for Cook time
To turn off the audible signal:
Press any button.
and End time
flashes.
lights up.
button repeatedly until the symbol for Cook time
buttons, set the desired cooking time.
begins to count down.
begins to count down after the selected
or buttons (max. 59 minutes).
or buttons, select the temperature.
lights up.
button, the current time can be called up.
flashes.
USE AND CARE
or buttons.
flashes.
PG 12