Advertisement
Quick Installation Guide
DN-7053 – WIRELESS LAN USB 2.0 ADAPTER
Package Contents .......................................................................... Page 1
Network Card Installation .............................................................. Page 2
Connect To Wireless Access Point................................................ Page 4
Package Contents
Before you starting to use this USB wireless network card, please check if there' s
anything missing in the package, and contact your dealer of purchase to claim for
missing items:
USB Wireless Network Card .... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... . 1
Quick installation guide (1 pcs) ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .. 2
User manual / device driver CDROM (1 pcs) ... ... ... ... ... .... ... ... ... ... ... ... ... ..... 3
Advertisement
Table of Contents
Related Manuals for Digitus DN-7053
Summary of Contents for Digitus DN-7053
- Page 1 Quick Installation Guide DN-7053 – WIRELESS LAN USB 2.0 ADAPTER Package Contents ................Page 1 Network Card Installation .............. Page 2 Connect to Wireless Access Point..........Page 4 Package Contents Before you starting to use this USB wireless network card, please check if there’ s...
- Page 2 Network Card Installation Please follow the following instructions to install your new USB wireless network card: 1. Please insert the wireless network card into an available USB 2.0 port of your computer. You can insert the card when the computer is power off or on.
- Page 3 4. Please read the end user license agreement and click ‘ Yes’ to accept license agreement. 5. Please select ‘ Optimize for WiFi mode’ for wireless compatibility, then click ‘ Next>’ . If you want to enhance wireless performance, please select ‘...
- Page 4 Connect to Wireless Access Point Using Configuration Utility to Connect to Wireless Access Point 1. After installation is complete, wireless configuration utility will be shown as an icon at the lower-right corner of your windows desktop. Please click the icon by right mouse key, and select ‘...
- Page 5 4. If the wireless access point uses encryption, you have to input WEP passphrase or WPA preshared key. Please ask the owner of the wireless access point you want to connect, and input the correct passphrase / preshared key here, then click ‘ OK’ . If the value you inputted here is wrong, you will not be able to connect to wireless access point.
Need help?
Do you have a question about the DN-7053 and is the answer not in the manual?
Questions and answers