Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Digitus DN-7042-1
Summary of Contents for Digitus DN-7042-1
- Page 1 WIRELESS 150N USB 2.0 ADAPTER Quick Installation Guide DN-7042-1 Rev.3...
-
Page 2: Driver Installation
Driver Installation Please follow the following instructions to install your new wireless USB Adapter: Insert the USB wireless network card into an empty USB 2.0 port of your computer, when computer is switched on. Never use force to insert the card, if you feel it’s stuck, flip the card over and try again. The following message will appear on your computer, click ‘Cancel / Close’. - Page 3 4. Installation descriptions shown. Click ‘Next’ to continue 5. Once the installation is finished the computer will be asked to reboot. You can click ‘Finish’ and reboot the computer to finish the installation of driver files...
- Page 4 6. Insert the USB wireless network card into an USB 2.0 port of your computer, the system will find the new hardware and will install the drivers automatically. 7. After finishing driver installation, click adapter utility from your taskbar or programs folder.
- Page 5 8. Fill in the security information if any requirement, and then click “OK” to connect the wireless network. 9. Connected successfully. It will show the status screen.
- Page 6 DN-7042-1 Technical Description Frequency Range: 2412MHz-2472MHz for 802.11b, g, n/HT20 2422MHz-2462MHz for 802.11n/HT40 Transmit Power: 9.0 dBm EIRP Hardware Version: U0119 V1.1 Software Version: The manual content may be changed. Please also refer to the latest version on the web shop.
Need help?
Do you have a question about the DN-7042-1 and is the answer not in the manual?
Questions and answers